Active Member
|
[China]
Address: Room 1204, DingCheng International Building, 518028 Futian District, SHENZHEN, CN
Contact name:Doris Guo
ChongMing Group (HK) Int'l Co., Ltd |
|
|
LM258DR LM258DGKR LM2904DR LM2904ITPX/NOPB LM2904QDRQ1 LM2904VQDRG4Q1 LM2904VQDRQ1 Audio Power Amplifier IC
1 Features
Family of Standard Inductors and Transformers
NPN Output Switches 3 A, Can Stand Off 65 V
Wide Input Voltage Range: 4 V to 40 V
Current-mode Operation for Improved Transient Response, Line Regulation, and Current Limit
100-kHz Switching Frequency
Internal Soft-Start Function Reduces In-rush Current During Start-up
Output Transistor Protected by Current Limit, Undervoltage Lockout, and Thermal Shutdown
System Output Voltage Tolerance of ±4% Maximum Over Line and Load Conditions
2 Applications
Flyback Regulator
Multiple-output Regulator
Simple Boost Regulator
Forward Converter
3 Description
The LM2585 series of regulators are monolithic integrated circuits specifically designed for flyback, step-up (boost), and forward converter applications. The device is available in 4 different output voltage versions: 3.3 V, 5 V, 12 V, and adjustable.
Requiring a minimum number of external components, these regulators are cost effective and simple to use. Included in the datasheet are typical circuits of boost and flyback regulators. Also listed are selector guides for diodes and capacitors and a family of standard inductors and flyback transformers designed to work with these switching regulators.
The power switch is a 3-A NPN device that can stand off 65 V. Protecting the power switch are current and thermal limiting circuits, and an undervoltage lockout circuit. This IC contains a 100-kHz fixed-frequency internal oscillator that permits the use of small magnetics. Other features include soft start mode to reduce in-rush current during start-up, current mode control for improved rejection of input voltage and output load transients and cycle-by-cycle current limiting. An output voltage tolerance of ±4%, within specified input voltages and output load conditions, is specified for the power supply system.
Device Information
PART NUMBER | PACKAGE | BODY SIZE (NOM) |
LM2585 | DDPAK/ TO-263 (5) | 10.16 mm × 8.42 mm |
TO-220 (5) | 14.986 mm × 10.16 mm |
