Circuit Board Chip W25Q128JVSIQ 128M BIT IC Flash with Dual, Qual
SPI & QPI
GENERAL DESCRIPTIONS
The W25Q128JV (128M-bit) Serial Flash memory provides a storage
solution for systems with limited space, pins and power. The 25Q
series offers flexibility and performance well beyond ordinary
Serial Flash devices. They are ideal for code shadowing to RAM,
executing code directly from Dual/Quad SPI (XIP) and storing voice,
text and data. The device operates on a single 2.7V to 3.6V power
supply with current consumption as low as 1µA for power-down. All
devices are offered in space-saving packages.
The W25Q128JV array is organized into 65,536 programmable pages of
256-bytes each. Up to 256 bytes can be programmed at a time. Pages
can be erased in groups of 16 (4KB sector erase), groups of 128
(32KB block erase), groups of 256 (64KB block erase) or the entire
chip (chip erase).
The W25Q128JV has 4,096 erasable sectors and 256 erasable blocks
respectively. The small 4KB sectors allow for greater flexibility
in applications that require data and parameter storage. (See
Figure 2.) The W25Q128JV supports the standard Serial Peripheral
Interface (SPI), Dual/Quad I/O SPI: Serial Clock, Chip Select,
Serial Data I/O0 (DI), I/O1 (DO), I/O2 and I/O3. SPI clock
frequencies of W25Q128JV of up to 133MHz are supported allowing
equivalent clock rates of 266MHz (133MHz x 2) for Dual I/O and
532MHz (133MHz x 4) for Quad I/O when using the Fast Read Dual/Quad
I/O. These transfer rates can outperform standard Asynchronous 8
and 16-bit Parallel Flash memories.
Additionally, the device supports JEDEC standard manufacturer and
device ID and SFDP, and a 64-bit Unique Serial Number and three
256-bytes Security Registers.
FEATURES New Family of SpiFlash Memories
– W25Q128JV: 128M-bit / 16M-byte
– Standard SPI: CLK, /CS, DI, DO
– Dual SPI: CLK, /CS, IO0, IO1
– Quad SPI: CLK, /CS, IO0, IO1, IO2, IO3
– Software & Hardware Reset(1)
Highest Performance Serial Flash
– 133MHz Single, Dual/Quad SPI clocks
– 266/532MHz equivalent Dual/Quad SPI
– 66MB/S continuous data transfer rate
– Min. 100K Program-Erase cycles per sector
– More than 20-year data retention
Efficient “Continuous Read”
– Continuous Read with 8/16/32/64-Byte Wrap
– As few as 8 clocks to address memory
– Allows true XIP (execute in place) operation
Low Power, Wide Temperature Range
– Single 2.7 to 3.6V supply
– <1µA Power-down (typ.)
– -40°C to +85°C operating range
– -40°C to +105°C operating range
Flexible Architecture with 4KB sectors
– Uniform Sector/Block Erase (4K/32K/64K-Byte)
– Program 1 to 256 byte per programmable page
– Erase/Program Suspend & Resume
Advanced Security Features
– Software and Hardware Write-Protect
– Power Supply Lock-Down
– Special OTP protection
– Top/Bottom, Complement array protection
– Individual Block/Sector array protection
– 64-Bit Unique ID for each device
– Discoverable Parameters (SFDP) Register
– 3X256-Bytes Security Registers with OTP locks
– Volatile & Non-volatile Status Register Bits
Similar Item:
Serial NOR Flash , SOIC-8 SPI NOR Flash , SOIC-8 NOR Flash , WSON-8
S25FL128L NOR Flash , SPI AEC-Q100 NOR Flash , 4 Mbit USON-8 SPI
NOR Flash
