Insulator Resistance To Electrical Tracking And Erosion Testing
Machine IEC60587
Standards:
IEC60587: 1984 "Test Methods for Evaluating the Resistance to Tracking and
Corrosion of Electrical Insulating Materials Used in Severe
Environmental Conditions".
Product overview:
The high-voltage tracking tester is suitable for testing the
resistance to tracking and corrosion of solid insulating materials
such as insulators and silicone rubber. It simulates the use of
liquid contaminants and inclined surface samples under power
frequency (48Hz-62Hz). The tracking and corrosion measurement
assesses the resistance to tracking and corrosion of electrical
insulating materials used under severe environmental conditions.
The utility model discloses a high voltage leakage mark tester,
including a control box and a test box, a control box, a touch
screen and a PLC controller are connected with a 24V DC source, a
PLC controller is connected with a touch screen and a motor driver,
a motor driver is connected with a DC motor, a DC motor is
connected with a voltage regulator, and a voltage regulator is
connected to a transformer, The transformer is equipped with
voltage sensor, which is connected with PLC controller, and a
contactor is set between DC motor I and voltage regulator; The test
box is equipped with a sample table, on which several sample slots
are set. The sample tank is connected with the transformer. A
high-voltage on-off controller is set between the transformer and
the sample tank. The sample tank is equipped with a current
collector, and the current collector is connected with the PLC
controller. The pollution liquid controller is set above the sample
table in the test chamber, and the pollution liquid controller is
equipped with DC motor 2, DC motor 2 is connected to motor driver.
Technical parameters:
Model : DX8427
1. Electrode material: 304 corrosion-resistant stainless steel 2. Test voltage drop: ≤5% 3. Time setting: can be set freely 4. Electrode spacing: (50±0.5) mm 5. Electrode fixing bracket: composite material with separate upper
and lower electrodes, high insulation and high strength 6. A group of 5 samples can be tested at the same time 7. Drop size: can be set freely according to needs 8. Short-circuit requirements: short-circuit current ≥60mA for 2S 9. Filter paper size: made in accordance with the standard size
requirements, the thickness of the filter paper is 0.15 -0.17mm;
this equipment is equipped with filter paper 304 stainless steel
template to avoid the influence of uneven liquid flow rate caused
by inaccurate filter paper cutting on the test 10. Volume in the box: ≥ 0.75 cubic meters, with a glass
observation door (can be customized according to requirements) 11. The cabinet is made of 1.8mm Q235 steel plate by high
temperature spraying, which greatly enhances the corrosion
resistance and strength. 12. Control device: It adopts high-end PLC+Taiwan Weilun touch
screen control, precise control, simple operation, completely
humanized design, automatic report generation at the end of the
test, and the panel thermal printer can print test results in a
timely manner; 13. External dimensions of the instrument: 1300L*700W*1800H(mm) .