Results forfinger probe testfrom 4423 Products.
|
|
Product Description The Rigid Test Finger is a precision test probe made according to Figure 7 (Fig. 7) of the IEC 61032 (Test probe 11) and is used to simulate a human finger. It ...
|
|
|
|
|
Figure 58.5 Test Probe Product details: It conforms to the standard of UL499 Fig 6.4 and UL982-2006 Fig 58.5(PA190). It is applicable for the electrical equipment. The handle is ...
|
|
|
|
|
UL Enamel Wire Probe 25 Usage: This probe is use to checking access to enamel coated wire accord to UL standard requirement. stainless steel with stainless stell handle.
|
|
|
|
|
Articulate Probe With Flat And Cone Shaped Hand 10.5 – 11.5 Year Age Standard: UL 60335-2-24 Household and Similar Electrical Appliances – Safety – Part 2-24: Particular Requiremen...
|
|
|
|
|
IEC60065 Test Hook for Audio and Video Made by 304 Stainless Steel 1. Introduction The test hook is designed according to IEC60065 clause 9.1.7 and figure 4. It is mainly applied ...
|
|
|
|
|
Product Description Complies with IEC61032 Figure 7 Test Rig 11, GB/T16842 Test Probe 11, GB8898, IEC60065, IEC60598, GB7000, IEC60335, GB4706 and other standard requirements. It ...
|
|
|
|
|
Test Rod With Nylon Handle 100mm Product information: The test probe is designed and manufactured according to the IEC 60335-2-16 clause 22.102. It is used to test concealment of ...
|
|
|
|
|
IEC 60529 Test Sphere50mm , IP1X This probe is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection against ...
|
|
|
|
|
Articulate Probe With Flat And Cone Shaped Hand 10.5 – 11.5 Year Age Standard: UL 60335-2-24 Household and Similar Electrical Appliances – Safety – Part 2-24: Particular Requiremen...
|
|
|
|
|
IEC60529 Stainless Steel 2.5mm Test Rod for IP3 and suffix C code Test Introduction: The 2.5mm Test Rod is used to verify the protection of persons against access to hazardous ...
|
|
|
|
|
UL398 Fig 8.2 Probe for Film-coated Wire Product information: This probe conforms to standard requirement of UL398 Fig 8.2(PA170B),UL507(PA170D),UL749 Fig 2,UL982 Fig 58.6 and ...
|
|
|
|
|
Antenna coaxial sockets mounted on the apparatus Antenna coaxial sockets mounted on the apparatus and incorporating parts or components which isolate HAZARDOUS LIVE parts from ...
|
|
|
|
|
IEC60529 1.0mm Test Wire used for IP4 Code Test with Calibrated Certificate Introduction: Used to verify the protection of persons against access to hazardous parts. Also used to ...
|
|
|
|
|
IEC60335-2-11 Figure 104 Surface Temperature Probe Product information: This probe conforms to the IEC60335-2-11 figure 104 and IEC60335-2-6-2002 figure 104 standard requirements. ...
|
|
|
|
|
Steel Test Pin with Nylon Handle as Per BS1363-1 Figure 1 1. Introduction The test pin meets the requirements of BS1363-1 clause 12.6.1 and figure 1.The test pin meets the ...
|
|
|
|
|
UL982 Probe For Uninsulated Live Parts And Film-Coated Wire Length 101.6mm Diameter 19.1 Description in UL982 2009 Clause 58.9.2: In the enclosure of an appliance other than as ...
|
|
|
|
|
Abration Resistance Test Pin Made by Hardened Steel Conforms to IEC60950 1. Introduction The scratch resistance test uses a hardened steel pin for scratching. The end of the steel ...
|
|
|
|
|
IEC60335-2-14 Stainless Steel Test Probe Product information: The stirrer shall incorporate a biased-off switch that is recessed or guarded to prevent accidental operation. It ...
|
|
|
|
|
IEC60335-2-80 Figure 102 Test Pin for Testing the Fan 1. Introduction The test pin is completed designed according to IEC60335-2-80 figure 102, it is to simulate the bolt of fan. ...
|
|
|
|
|
IEC60335-2-14 Stainless Steel Test Probe Product information: The stirrer shall incorporate a biased-off switch that is recessed or guarded to prevent accidental operation. It ...
|
|
|
You may also be interested in :
