Wenzhou jhenten machinery co.,ltd |
|
ZTDB Lenticular Filter Housing is a new type of stack filters can be used in place of diatomite filter, of tiny impurities in all kinds of liquid filtration, clarification, purification | ||||
The overall structure is designed and manufactured according to the health level, the material liquid is not left, and the material is easy to clean, and high precision polishing. | ||||
ZTDB Lenticular Filter Housing cake up to 4 Filter Cake, can satisfy the needs of traffic filtering requirements |
Application | ||||
• Microbiological and solid filtration of alcohol, syrup, beer |
Feature | ||
• Easy to clean, the import and export can be configured specifically to discharge valve, easy to drain | ||
• Easy to change the cartridges, reduce the leachate leakage | ||
Surface finish | Operating Conditions | ||||||||
Finish Type | Mechanical polishing, electrolytic polishing | Max Operating pressure | 1.0MPa | ||||||
polishing precision | Inter wall 0.3μm, Outer wall 0.4μm | Max Operating Temp. | 110℃ | ||||||
Material | Connection | ||||||||
Shell | 304, 316L, SAF2507, Carbon | Shell connection | Flange | ||||||
Vent | 304, 316L | In-outlet N1, N2 | Flange, Quick-open, | ||||||
Eyebolt | 304 | Pressure gauge (optional) | 1.5” Quick-open | ||||||
Stabilizer blade | 304 | Drain valve(optional) | 1” Quick-open | ||||||
O-ring | EPDM, PTFE, Viton, Silicone | Vent valve (optional) | 1/2” Quick-open |
Dimension Parameters | 12’’ Filter Cake | |||
1pcs | 2pcs | 3pcs | 4pcs | |
A:Total height | 950 | 1210 | 1490 | 1760 |
B: The distance from inlet to center | 200 | |||
C:Diameter | Φ325 | |||
D:The height from in-outlet to ground | 280 | |||
E:The height from vent valve to ground | 356 | |||
In-outlet N1, N2 dimension | 2” | |||
16’’ Filter Cake | ||||
1pcs | 2pcs | 3pcs | 4pcs | |
960 | 1230 | 1500 | 1770 | |
250 | ||||
Φ450 | ||||
280 | ||||
356 | ||||
2” | ||||
The above-mentioned data is the standard, it can customize according to customer's requirements. |
Selection Table | ||||||||||
[Qty. of Filter Cake] | [Model of Filter Cake] | [Shell Material] | [In-outlet connection] | [O-ring] | ||||||
ZTDB | 1B | 12 | 4 | F | E | |||||
1B=1pc | 12=12” Filter Cake | 4= 304 | F= Flange | E=EPDM | ||||||
2B=2pcs | 16=16” Filter Cake | 6= 316L | K= Quick-open | P=PTFE | ||||||
3B=3pcs | L= Screw thread | V=Viton | ||||||||
4B=4pcs | S=Silicone |