Indoor Plastic Wall Outlet 2.0mm Fiber Optic Termination Box

Indoor Plastic Wall Outlet 2.0mm Fiber Optic Termination Box

2Core SC Indoor Plastic Wall Outlet Socket Panel Fiber Optic Cable Termination Distribution Network

fiber optic rosette is a ftth network wall mount panel or desktop, it is for direct connection or fusion splice with pigtails. it can use all kindly of adapters like SC LC, and maximum fusion 2cores single fiber with sleeves. 

Specification

Application

FTTH internal environment wall mount

Features

The box is made of high quality engineeringplastic ABS, brand new materials, not have second hand, white color.

Compact size, light weight, special design, according to the internal wiring and structural requirements, the surface adopts gradient design, non planar;

There are 2 card-type designs on the left and right sides, which open and close firmly, and the lid is not easy to fall off. It is easy to handle, no other tools are needed during construction;

The front panel adopts the universal SC adapter, which is convenient and quick, and the construction is simple. It can store 2m of optical cord or pigtails with 0.9mm diameter;

At top of the box, there is logo print reserved position with paper block if no need, and we can open 2 screws to fix the cover and bottom to make it more safe, then without screw driver, can not open the box by hand. details pls see above picture.

The box front is for adapters exit, only insert the pigtails or patch cord in, then can connected. standard type or shutter type both ok.

Cable entry from bottom hole, not side or front, this hidden wiring design, more beautiful and safe, to prevent man-made damage to the optical fiber fracture and affect the optical fiber transmission performance;

The cable enter the box from the bottom middle hole or small square holes at the corners, there is special space for cable routing. Which make it more clean after installation, no cable will be seen by human eye.

It can be installed on any vertical flat surface on wall; if on field installation use mechanical splicer, we can fix a holder at the 4 holes around the big hole in the middle. There are many wall mounting holes design at the bottom plate to make installation easier.

Standard accessories

2pcs fixing screws, 2pcs screws for closing the cover, 2sleeve, heat shrink sleeve slot(optional), adapter(optional), pigtail(optional)

Any more questions, please call us at:

We will be back to you at first sight.

Welcome inquir!

There is cable ports at both sides and at back of the box, which ensure flexible fiber distribution and management. when use, please use tools to cut off the block, then can use.