|
[China]
Trade Verify
Address: A507 5F, China Zhenhua Production Center, 64Heping Road, Longhua,Shenzhen,China
Contact name:Sophie
YINGDA TECHNOLOGY LIMITED |
|
Verified Suppliers
|
|
|
FTTH PP Mini Fiber Cable Joint Box 1:8 Optical Splitter SC/APC Filed Assembly Quick Connector
12 Cores FTTH Mini Dome Fiber Optic Cable Splice Closure is quick installed and reliable sealed closure.
With engineering plastic in scientific formula, injection-molding, and excellent mechanical strength, it can prevent
aging effectively caused by cold, hot, oxygen, UV etc.With flame retardant,waterproof, anti-vibration and anti
impact box, the closure could protect the optic cable joints from tensile ,impact,bending,flattening, twisting,
and axial compression. All the sealing accessories qualified in the viscosity and white ants resistance test.
Reliable sealing performance, convenient for repeated use.
Specification
| Model | Tray capacity | Dimension/mm | Entry port & Available cable dia. | Raw material |
| GJS-0208S | 12cores | 183*182 | 1 oval port : Ф10-Ф16 8 pcs SC adapter ports for drop cable | Dome & base : Modified P.P Tray: ABS |
| Sealing method | Full Mechanical sealing way. | Application | Wall or pole mount | |
| Bending Radius | > 40mm | Durability | 25 years | |
| Available Splitter | 1 piece 1:8 / 2:8 micro PLC splitter | |||
FTTH Fiber Terminal Box features
1. the top layer is for fusion and splitter input fix.
it is small size, light weight, large capacity:12cores for fusion ,can hold 1pc 1 to 8 plc splitter in the fusion splice tray, and there is SC adapter holder to fix the input of the splitter, you can put the splitter steel tube in the tray too.
enough space for fiber stroage and management.
2. the second layer down the fusion splice tray is for fiber optic cable management area with clamps, and you can fix the steel tube of the splitter in the white clip.
at bottom of the box, it is 8pcs SC adapter ports, and there is metal cable rix rods for entry feeder cable (mid span express port), with rubber seal for IP65 waterproof grade.
3. Cable ports: 1 mid span cable port for uncut cable entry and exit, 8pcs SC adapter outports, you can directly use fast connector or normal SC connectors to finish the on-site construction, it is fast and cheap than Huawei Mini SC adapters.
NOTE: the sc dust cap whould be sharp type, or else u can not take it off when install the adapter in the box.
Package information:
inner with plastic bag, and wall mount pole mount kits, nylon tie, heatshrink protection sleeve, label mark, etc.
Cable Port and fast connector waterproof plug:
Wiring Diagram:
Application:
Widely used to connect or branch the outdoor optic cable fibers in
aerial applications.
Fully Mechanical sealing and re-open design, available for split with fast connectors without
open the closure. Provide optional valve and earthling rod. Simple inner structured and easy
to installation, is the best choice for the network construction.
Technical Parameter:
| Working temperature | -40ºC~+65ºC |
| Atmospheric Pressure | 62-106kPa |
| Axial Tension | > 1000N/1min |
| Stretching Resistance | >2000N/10cm² (1min) |
| Flatten Pressure | >2000N/100mm(1min) |
| Insulation Resistance | >2 × 104MΩ |
| Voltage Strength | 15KV(DC)/1min,no arcover or breakdown |
| Temperature Cycle | -40ºC~+65ºC,with inner pressure 60(+5)Kpa,cycle:10times, the decrease of pressure can't exceed 5Kpa at room temperature. |
How to use the box?
We offer a series of 8 port, 16 ports SC fast connector exit, please click below for further information:
http://www.fibreopticbox.com/sale-12072486-fast-connector-exit-optic-fiber-cable-splice-closure-sc-adapter-holder-1x8-splitter.html
http://www.fibreopticbox.com/sale-12071701-ip65-16-ports-plc-splitter-fiber-cable-joint-box-fast-mechanical-connector-exit.html
