Home Companies Unionfull (Insulation) Group Ltd.

Fiberglass Fabric 6522 4OZ 27" Wide Surfboard Glassing Laminating Durable Cloth

Unionfull (Insulation) Group Ltd.

Contact Us

[China] country

Trade Verify

Address: Textiles Technology Park,No.35 Jingbianshi Rd,Jiaxing, Zhejiang Province,China

Contact name:Sam

Inquir Now

Unionfull (Insulation) Group Ltd.

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

Fiberglass Fabric 6522 4OZ 27" Wide Surfboard Glassing Laminating Durable Cloth

Country/Region china
City & Province jiaxing zhejiang
Categories Fiberglass Cloth
InquireNow

Product Details

Fiberglass Fabric 6522 4OZ 27" Wide Surfboard Glassing Laminating Durable Cloth

 

Build Your Surfboard

 

Modern design surfboard blanks are made from two materials of foam. They are PU polyurethane and EPS polystyrene. Current most boards are made of PU foam blanks and laminated by Polyester resin. 

 

After shaping the foam blank, it’s laminated/glassing. This process uses resin and e-glass fiberglass fabric to seal the foam board and improve the tensile strength. Modern surfboards are laminated with 4 ounce and 6 ounce fiberglass cloth. The resins can be polyester resin without the addition of sanding solution and epoxy resin.

 

Then,prepare the fiberglass cloth: lay the fabric over the foam. Then resin is applied with a squeegee to evenly distribute and saturate the resin in the e-glass cloth. The process should be repeated on the bottom too. And warp the rails of surfboard and blend the cloth over each side. Once the board is laminated and the fin plugs are put in, sanded or gloss finishing should be done to make the surfboard appears better. 

 

Laminating Fiberglass Cloth

 

4oz 6522 e-glass fiberglass fabric is a light weight, fire resistant and high tensile strength woven cloth. It is flexible so that easy to fabricate and apply to the board deck. 4oz, 6oz and 8oz are standard weight for surfboard glassing (laminating). These economical fabrics with durability can improve the surfboard in high tensile trength but low weight. 
 
When using the fiberglass cloth for glassing, almost all stock standard shortboards are used two layers of 4oz glass on the deck, and one layer on the bottom (4+4×4). And for team boards is 4×4 or 4+4(3/4 patch) x4, for strong glass job: 4+6×6, for standard malibu glass job: 6+6×6. 4oz 27.5 inches width are suitable for shortboard. Our standard roll length is 100 meters.
 
Data Sheet
 
Unionfull is able to produce the fabric as the customer's requirement.

 

Item4oz Fiberglass Cloth
Yarn TypeE-glass
WeavePlain
YarnG150 1/2, G150 1/2
Count Per CM9.6 / 8.7
Area Weight4oz / sq.yd
Thickness0.12mm
Width27.5 Inches (70CM)
Length100m / roll
Work Temperature-50 to 550℃

 
 
Properties

 

  1. Fiberglass cloth roll 100 meters
  2. Durable, lightweight
  3. Chemical resistance
  4. Anti corrosion
  5. Easily to be wet out by resin
  6. Easy to fabricate, flexible
  7. Electrical insulation 

 
Application

 

  • Surfboard / boat building
  • Printed circuit board 
  • Pipe anti-corrosion
  • Septic tank, pool building
  • Wire cable electronic insulation​

 
Pictures
 

 


 


 

Hot Products

Fiberglass Fabric 6522 4OZ 27" Wide Surfboard Glassing Laminating Durable Cloth Build Your Surfboard ...
Fiberglass Fabric PTFE Coated Stovetop Burner Protector 10.6"X10.6" Beige 260℃ Material of stovetop ...
White Silicone Fiberglass Fabric Hot Ashes Protection BBQ Apron 260℃ 0.3MM BBQ apron is made of ...
Electronic Fiberglass Fabric 200GSM 7628 0.2MM Plain 550℃ High Strength 7628 e-glass fiber glass ...
Fiberglass Fabric 10.6"X10.6" Beige PTFE Stovetop Burner Protector 260℃ Stovetop burner protector is ...
White Silicone Fiberglass Fabric Hot Ashes Protection BBQ Apron 260℃ 0.3MM Material of this BBQ ...