|
[China]
Trade Verify
Address: 2F 7B Nangang First Industrial Park Songbai Road Xili Town, Nanshan District, Shenzhen City Guangdong China
Contact name:Tina
Shenzhen Qiutian Technology Co., Ltd |
|
Verified Suppliers
|
|
|
Ethernet Media Converter 2Fiber and 8RJ45 10/100M or 10/100/1000M
Technical Parameters
| Rate | 10/100M or 10/100/1000M |
| Protocol | supported IEEE802.3 |
| Fiber type | single / dual fiber |
| Optic mode | single / multimode |
| Transmission mode | half / full duplex |
| Ethernet interface | RJ-45 |
| Optic interface | SC/FC/ST |
| Optic wavelength | 850nm, 1310nm, 1550nm,1310/1550nm,1490/1550nm |
| BER | < 1/1000000000 |
| MTBF | 3 years |
| POWER | 2.5W |
| Power supply | AC220V/0.5A,DC-48 V /0.5A, DC5V/1A,2A |
| Working temperature | 0~50℃ |
| Working humidity | 5%-95% |
| Storage temperature | -40℃~70℃ |
| Storage humidity | 5%~95%(no-condensing) |
Product Overview
The multi-port fiber media converter has the similar functions as normal fiber media converter, when you use the converter,all the data from different ports can be shared, realize the data sharing.It is suitable for intelligent community, it extend the network transmission from100m to 120km. Also it can be realize the interconnection between motherboard server, Repeaters, hubs, switches, terminal.Plug and play design makes easy installation, no on-site adjustment, All the light, electricity interfaces are in line with international standards, products applicable to different harsh industrial environment. The installation and operation procedures of the Fiber Optic Media Converter are simple and straight forward. Operation status can be monitored through a set of Diagnostic LED located in the front panel. Since the data rate is auto-negotiated, no internal adjustments or setting are necessary. Standard shielded RJ-45 connectors are provided for Cat. 5 compliance.
Product features
* Supports 10/100/1000Base-T, 1000Base-X protocol.
* Flow control for full duplex and half duplex.
* Supports up to 10k byte JUMBO frame.
* Supports Fiber Port Trunking, Increasing Fiber Channel Bandwidth
and Supply Fiber Channel Redundancy.
* Supports Ports Based VLANS and TAG Based VLANS.
* In conformity to safety code of FCC and CE MARK.
* Connector: Multi-UTP RJ-45connector, one or two fiber connector
* Operation mode: full duplex mode or half duplex mode
* Power supply parameter: DC 5V 1A/2A
* Environmental temperature: 0-50℃
* Relative humidity: 5%-90%
* UTP cable: Cat5 UTP cable
* Transfer fiber: multimode(50/125, 62.5/125 or 100/140um); single
mod( 8.3/125,8.7/125, 9/125 or 10/125um).
Product Picture
Packaging & Shipping
● All of our package are international standard package
● We will deliver our products as soon as the order confirmed
