3M PVC Aqua Jacket Duplex OS2 LC To LC single mode fiber cable

3M PVC (OFNR) Aqua Jacket OS2 Duplex Single-Mode Fiber Patch Cord LC To LC

1.Fiber Patch Cord Basic Introduction:

A Fiber OS1 LC-LC 3 Meter LSZH Fiber Patch Cord conforms with TIA/EIA 492AAAA and IEC60793-2-10 A1b standards and complies with RoHS specifications.

The LC to LC Single-mode Duplex OS2 fiber patch cords operate at -20oC to +70oC and have a minimum installation bending radius of 5.0 cm and a minimum long-term bending radius of 3 cm.

LC to LC patch cords are commonly used in passive applications (GPON, FTTX, and LANs) - LC duplex connectors are joined with a plastic clip, easy to remove in case you need to separate the connectors, many types of cables and connectors can be available.

2. Fiber Optic Patch Cord LC To LC Benefit & Features:

-- Meets Telecordia-GR-326-CORE specifications

-- Low insertion loss&Ultra low back reflection

-- Fiber patch cords, optic fiber cable, SM & MM available

-- Standard & custom configurations

-- OEM service with 15-year experiences, free samples are available

--100% Insertion, Return Loss, End Face, and Interference inspection

3.Fiber Optic Patch Cord Applications:

-- Telecommunication

-- CATV

-- LAN & WAN

-- Network

-- Broadband

-- FTTP

4.Specification&Technology Parameters

* For Device with connector.IL is 0.3dB higher,RL is 5dB lower,ER is 2dB lower.

* The default connector key is aligned to the slow axis.

5. Fiber patch cord LC to LC Specification& Technology Parameter​:

6.LC to LC Patch Cord Ordering Information:

* EX:OFC-D-LA-LA-09-1-1.0

7. How to choose Fiber patch cords?

1) Fiber Cable Mode: Single Mode or Multimode

The mode of fiber patch cables indicates how light beams travel within the fiber. There are two fiber cable modes: single mode and multimode.

2) Number of Fiber Strands: Simplex or Duplex

According to the number of fiber strands, there are simplex and duplex fiber patch cord. As shown in Figure 2, simplex fiber patch cord contains one single strand of fiber with one simplex connector on each end. It can be linked with a pair of BiDi transceiver modules featuring with one port. Whereas duplex fiber patch cord consists of two strands of glass or plastic with one duplex connector (or considered as two simplex connectors). It is often linked with common transceivers or dual fiber BiDi transceivers.

3) Choose the Right Cable Jacket Type (PVC/LSZH/OFNP/Armored)

Usually, there are three cable jacket types: Polyvinyl Chloride (PVC), Low Smoke Zero Halogen (LSZH) and Optical Fiber Nonconductive Plenum (OFNP). You can see there features in figure below and choose the right one for your network.

4)  Choose the Right Connector Polish Type (UPC/APC)

Since the loss of the APC connector is lower than UPC connectors, usually, the optical performance of APC connectors is better than UPC connectors. In the current market, the APC connectors are widely used in applications such as FTTx, passive optical network (PON) and wavelength-division multiplexing (WDM) that are more sensitive to return loss. But APC connector is usually expensive than UPC connector, so you should weigh the pros and cons. With those applications that call for high precision optical fiber signaling, APC should be the first consideration, but less sensitive digital systems will perform equally well using UPC. Usually, connector color of APC patch cable is green, and of UPC patch cable is blue.

8.Why Geehe?

-- Customers can get satisfying quality and services with competitive prices and punctual delivery
-- Prompt answer for any question and inquiry in the shortest time.

-- Products from factory directly, your cost reduced and time saved
-- Free Samples and whole project plans are available 

-- 24/7 standby with after-service team

-- Marketing Analysis reports can be shared

--15 years cooperate experience with famous brands

-- Quality control from raw materials and monitor the whole production process