Home Companies Shenzhen CY COM Product Co., Ltd.

DomeFiber Optic Enclosure with PLC splitter

Shenzhen CY COM Product Co., Ltd.
Active Member

Contact Us

[China] country

Address: 2nd F.,Block 1,Feihuangda Hi-Tech Park,Liyuhe Industrial Zone, Loucun,Guangming New Dist., Shenzhen, China

Contact name:Lena

Inquir Now

Shenzhen CY COM Product Co., Ltd.

DomeFiber Optic Enclosure with PLC splitter

Country/Region china
City & Province shenzhen guangdong
Categories Mobile Phone Chargers
InquireNow

Product Details

Fiber Optic Enclosure Network Equipment Fiber Optic Dome splice Closure with PLC Splitter

 

DESCRIPTION

Fiber optic closures are used throughout the network, including the fiber trunk, feeder, distribution, and last mile segments. CY COM's Fiber Optic Closures combine proven fiber management hardware with a highly reliable sealing system ,with excellent performance in reliability, installation and flexibility.

 

APPLICATION

Suitable for ribbon and non-ribbon fibers Aerial, duct, direct burial, and well Trunk lines Access networks FTTX, access networks
and broadband
 

FEATURES

Easily accessible for maintenance, changes, and expansion Protected against water ingress and harsh conditions Suitable for a variety of applications and environments including aerial, pedestal, buried, or underground Compatible with existing cable types

Sealing Performance

Pressurized up to 100Kpa±5Kpa into the sealed FOSC,then put the FOSC into the water 15minutes.There are no air bubbles.Or there is no change of air pressure within 24 hours.

Re-entry performance

Re-entry the FOSC 3 times as normal working condition,and pressurized up to 100Kpa±5Kpa into the sealed FOSC,then put the FOSC into the water 15minutes.There are no air bubbles.Or there is no change of air pressure within 24 hours.

Sealing Performance

Pressurized up to 100Kpa±5Kpa into the sealed FOSC,then put the FOSC into the water 15minutes.There are no air bubbles.Or there is no change of air pressure within 24 hours.

Re-entry performance

Re-entry the FOSC 3 times as normal working condition,and pressurized up to 100Kpa±5Kpa into the sealed FOSC,then put the FOSC into the water 15minutes.There are no air bubbles.Or there is no change of air pressure within 24 hours.

Mechanical Character

1. Tensile Test: The axial tensile strength should be not less than 800N,and there is not any crack.
 
2. Squeezing test: The FOSC can bear 2000N/m2 ,the lasting time is 1 minute.There is not any crack.
 
3. Impact test The FOSC can bear 16N.M impact 3 times,there is not any crack.
 
4. Bending test: The link part of cables and FOSC can bear 150N bending strength.The bending angle is ±450 ,repeat 10 times,there is not any crack.
 
5. Torsion Test: The FOSC can bear 50N.m torsion.The torsion angle is ±90°,repear 10 times,there is not any crack.

 

Hot Products

Mini Horizontal 12F 48C 96 Core IP67 Fiber Optic Enclosure Mini horizontal 12F 48C 96core inline ...
Wall Mounting 144 Core Optical Splice Fibre Dome Enclosure 720 Core 360 Core 144 Core Dome Fiber ...
PLC Splitter IP65 Wall Mounted Aerial Fiber Optic Enclosure GJS-M7/RS Fiber Optic Dome Closure with ...
MINI type 12 24 fibers optical fiber cable joint closure/outdoor In-line splice enclosure 1. ...
Fiber Optic Enclosure Network Equipment Fiber Optic Dome splice Closure with PLC Splitter DESCRIPTIO...
Horizontal/inline fiber optic cable junction box closure 12 24 48 36 72 96 144 core DESCRIPTION ...