Active Member
|
[China]
Address: 3F, Huayang Bldg, Minwang Rd, Minzhi Sub-district, Longhua District, Shenzhen, Guangdong, China
Contact name:Tao
Fiberall Technology (Shenzhen) Co., Ltd |
|
|
FAMC-FSSE35S-25 & FAMC-FSDE13S-25 , 10/100Base-TX To 100Base-FX 25KM Fast Ethernet Fiber Optic Media Converter SC
When connect fiber media converter to other equipment, or connect media converter and media converter, it needs to use LAN cable or Cat5/Cat6 patch cord. And there are two kinds of this cable, the one with cross wires and the one with parallel wires.
There are two types of RJ45 plug, T568A and T568B, patch cord with same plug is called straight wires, and patch cord with different plug is called cross wires.
In theory, there are two kinds of network devices, DTE devices and DCE devices. DTE devices are called data terminal devices, including routers, PC, and so on, refers to devices at the end of the network. The DCE device, called data communication equipment, like Fiberall fiber media converter, is used to connect networks, such as switches. Pin definition of DTE device port and DCE device port is different, for example, pin 1 of DTE is Tx, but pin 1 of DCE port is Rx. In this way, parallel wires are used to connect DTC and DCE is to make data sent by pin 1 of dte 1 reach pin 1 of dce1. So routers connect switches is DTE connect DCE, so it must use parallel wires. Interconnection between DTE and DTE, since the pin definition is the same, so straight wires cannot be used but should use cross wires which is with 1, 3, 2, 6 intersection wires. Similarly, interconnections of DCE devices are the same.
But now all kinds of devices are basically adaptive, regardless of the use of straight wires or cross wires can be automatically identified, so cross wires is rarely used.
Specifications Of 100M Fiber Media Converter
| Part No. | FAMC-FSSE35S-25 & FAMC-FSDE13S-25 |
| Compliant Standards | IEEE802.3 , IEEE802.3u ,IEEE802.3x |
| Data Rate | 10/100M |
| Working Wavelength | 1310nm ,1550nm |
| Transmitting distance | Single mode up to 25KM |
| Fiber port | SC Simplex or SC Duplex |
| Fiber type | SM 9/125um |
| RJ45 interface | UTP-100ohm Cat.5 cable up to 100m |
| Power Supply | 5V, 1A(External Adapter) |
| Power consumption | 4W |
| Operating temperature | 0℃~60℃ |
| Storage temperature | -20℃~70℃ |
| Humidity | 5%~95%(Non-condensing) |
| OEM service | Available by Fiberall |
Main Features Of 25KM Ethernet Media Converter
1,Complied Standards: IEEE802.3 , IEEE802.3u ,IEEE802.3x,
10/100Base-Tx and 100Base-Fx standard;
2, Supports auto-negotiation of 10/100M rate and Auto-MDIX for Tx
port;
3, Supports transmission distance up to 25 kilometers;
4, Supports hot-swappable;
5, LED indicators provides real time status, easy to monitor;
6, Can be centralized used in 2U height rack (chassis).
