Active Member
|
[China]
Address: 3F, Huayang Bldg, Minwang Rd, Minzhi Sub-district, Longhua District, Shenzhen, Guangdong, China
Contact name:Tao
Fiberall Technology (Shenzhen) Co., Ltd |
|
|
FAMC-FSSE35F-10 & FAMC-FSSE53F-10, 10/100M Fiber To Ethernet Media Converter Compatible With SMF And FC Patch Cord
In the continuous development and improvement of the fiber media converter, users have put forward many new requirements for the equipment.
First of all, today's fiber optic media converter are not smart enough. For example, when the optical fiber media converter is broken, most of the products on the other side which is linked with the media converter will remain open, so the equipment such as routers, switches and so on still will continue to send data package to the port so it will result in data unreachable. So if the media converter manufacturer can realize automatic switching on optical media converter, when the fiber path is DOWN off, the electrical port will automatic alarm to the upper port, and to prevent the upper equipment continue to send data to the port, enable redundant links to ensure uninterrupted services.
Second, the fiber media converter itself should be better adapted to the actual network environment. In practical engineering project, fiber optic media converter is always install in corridor or outdoor and the power supply situation is very complex, which requires manufacturers to provide super wide supply voltage to adapt the unstable power supply situation. At the same time, some areas will appear ultra high temperature and ultra low temperature due to weather conditions, and the influence of lightning stroke and electromagnetic interference is actually exist, all these will bring great impact to the media converter outdoor, which requires the equipment providers must be careful in key components, circuit board, welding and structural design .
Specifications Of FAMC-FSSE35F-10 & FAMC-FSSE53F-10
| Product number | FAMC-FSSE35F-10 FAMC-FSSE53F-10 |
| Description | Fiber To Ethernet Media Converter 10/100M SX or DX FC 10KM |
| Brand name | Fiberall or OEM |
| Structure type | Standalone |
| Body material | Metal sheet |
| Standards | IEEE802.3 , IEEE802.3u ,IEEE802.1d, IEEE802.1q |
| Speed Rate | 10/100Mbps |
| Working Wavelength | 1310nm/1550nm 1510nm/1310nm |
| Transmitting distance | Single mode: 0-120km |
| Optical Interface | Default FC (SC, ST are available) |
| Fiber type | Single mode: 9/125 um |
| RJ45 port | UTP cable - up to 100m |
| Power Supply | Input:110~ 220VAC, or -48VDC |
| Power adapter | External |
| Temperature range | Operation 0℃~70℃; Storage -40℃~85℃ |
| Humidity | 5%~95%(Non-condensing) |
| LED indicator | Link, activity, full/half duplex and speed |
Important note: Copyright of original content and translated content belongs to Fiberall. Other personnel or group is not allowed to copy or reprint without permission. If found, liability shall be pursued in accordance with the law.
