Active Member
|
[China]
Address: 3F, Huayang Bldg, Minwang Rd, Minzhi Sub-district, Longhua District, Shenzhen, Guangdong, China
Contact name:Tao
Fiberall Technology (Shenzhen) Co., Ltd |
|
|
EPON ONU Optical Network Unit With 1 GE 3 FE Ports Support WiFi And VLAN
Fiberall ONU is intelligent equipment which can provide multi-services. They are complies with international IEEE 802.3ah standard and also meet China national occupation standard YD/T 1475-2006, as well as China Telecom CTC requirement for EPON device (China Telecom EPON Technical Requirement 2.1/3.0.) . So they are with good interoperability and operability and it is able to work with OLT made by mainstream manufacturers. So user can use different equipments from different suppliers which is with the best competitive cost in the same network and do not need to worry about the compatibility problem. but please pay attention that our ONU and OLT is not universal and they may meet compatible problem with some unique equipment. In order to avoid mistake, it is better to check the compatibility before order.
Our Optical Network Unit also support QoS based ITU-T Y.1291, VLAN based on IEEE 802.1Q, the one with WiFi also complies with 2.4GHz based on 802.11b/g/n.
Product Specifications Of FA-EONU8081
| Item | Parameter | specification |
| Optical interface specification | Transmission rate | Downstream:1.25 Gbps Upstream:1.25 Gbps |
| Optical specifications | Downstream Wavelength:1490nm+/-20nm Minimum receiver sensitivity:-27dBm Receive saturation power:-3dBm Upstream Wavelength:1310nm+/-50nm Minimum output optical power:0dBm | |
| Number of users can be connected | Up to 32 users within 20km. | |
| PON connector | SC/PC | |
| Optical physical conditions | IEEE802.3-2005 1000 BASE-PX20+ | |
| Optical fiber | G.652 single-mode fiber | |
| Ethernet interface specification | standard | IEEE802.3 IEEE802.3u IEEE802.3x |
| Port number | 1 GE— ONU Port | |
| 3 LAN— Router LAN Port | ||
| Connector type | RJ-45 | |
| LAN | IEEE 802.3 10/100BASE-T, Automated negotiation Full duplex/Half duplex Support RJ-45 MDI/MDIX | |
| VLAN | IEEE802.1q | |
| Support the connection distance | Up to 100 meters | |
| WLAN specification | WLAN | Compliant with IEEE802.11b/g/n |
| EMC and safety | EMC | EN55022 B(CISPR 22B) |
| ESD defend and preserve | IEC 61000-4-2 GR-1089-CORE | |
| Laser eye safety | FDA 21CFR 1040.10 and 1040.11 EN(IEC) 60825-1 EN(IEC) 60825-2 | |
| Environment-protection standard | RoHS | |
| Environmental requirements | Running temperature | -10ºC~55ºC |
| Storage temperature | -30ºC~60ºC | |
| Operating humidity | 10%~90% ,on-condensing | |
| Storage humidity | 5%~95% ,Non-condensing | |
| Power | Power Supply | DC12V/1A |
| Power consumption | Max 10W | |
| Physical specifications | Size | L x W x H:245 mm x 150 mm x 37mm |
| Weight | <500g |
Special Characteristics
Full speed without blocking exchange
8K MAC address table
Support Full Range VLAN ID
Support QinQ VLAN,1:1VLAN,VLAN Trunk etc.
support port monitor, port mirror ,port speed limit ,port SLA etc.
QoS based on interface,IEEE 802.1p,IPV4(ToS),Diff-Serv,IPV6,802.1Q VLAN ID,destination MAC or source MAC.
The Ethernet interfaces according to the specifications of the IEEE802.3.
128-bit AES encryption algorithm.
According to 802.1x remote management and user authentication
Support CTC2.1 standard
Complies with 2.4GHz IEEE802.11n v2.0 and backward compatible with IEEE 802.11b/g standards
Supports NAT/NAPT IP sharing
WAN Protocols: PPPoE/Static IP/PPTP/DHCP
Supports advanced 2T2R MIMO technology to enhance the throughput and coverage range significantly
High speed data rate - up to 300Mbps
Supports Virtual Server and DMZ
Supports Wi-Fi Protected Setup (WPS) with reset button
Supports 64/128-bit WEP encryption and WPA-PSK, WPA2-PSK security
Supports WMM function to meet the multimedia transmission requirement
Supports WDS mode
Supports Special Applications (Port Triggers)
Supports DDNS (DynDNS, TZO), and QoS
Supports MAC/IP filtering and URL blocking
Supports DHCP server and Anti-Dos firewall
