High Accuracy FTTH Fiber Optic PLC Splitter With SC Connector Low Insertion Loss

Brief Introduction for FA-PLCA1×8SP

PDL ( Polarization Dependent Loss ) is a criterial indice to describe the characteristic of fiber plc splitter . It is the maximum transmission difference of optical devices or systems in all polarization states . It is the ratio of the maximum transmission to the minimum transmission of optical devices .

PDL is defined as follows :

PDL_{dB}=10log〔Pmax/Pmin〕

Pmax and Pmin respectively represent the maximum and minimum output power of the test device ( DUT ) , means when the power is the same, to scan the input light in all possible polarization states and Pmax is the biggest value and Pmin is the smallest value .

PDL is a very important characteristic of optical devices. In fact every device has a polarization dependent transmission . Since the polarization of the transmitting signal is not confined to the optical fiber network , the insertion loss of the device varies with the polarization state . This effect can not be controlled in the transmission link and it has serious impact on the transmission quality . The PDL of some devices will bring large power fluctuations , thereby increasing the bit error rate of the system , and even lead to network failure . Combining with polarization mode dispersion ( PMD ) , PDL may become a major reason of pulse distortion and diffusion .

Technical Specification Of 1x8 PLC Splitter

Typical value is at +23 ℃.

Characteristics of Fiber Fiber Optic PLC Splitter

1. Low Insertion Loss And PDL

2. Large Operating Temperature Range

3. High Accuracy

4. Other Than Standard Product , We Also Offer OEM And ODM Service

All Our PLC Splitter Complies With The Below Standards

YD/T 2000.1-2014 (China National)

RoHS
Telcordia GR-1209-CORE
Telcordia GR-1221-CORE