2 PON 2 SFP Uplink Ports Optical Network Terminator , Gpon Olt Switch IEEE802.3ah

Fiber Optical Line Terminal OLT For EPON With 2 PON 2 SFP Uplink Ports

FA-EOLT8120A is a small scale office end OLT device of FTTX telecommunication level; it conforms to IEEE802.3-2005 standard; it can provide user with access to comprehensive services such as broadband, voice, IPTV and CATV.

How OLT To Distinguish Uplink Data From Different ONT ?

The downlink data is simple for ONT because they are broadcast down from OLT, ONT only need to apart the information for itself from all information. However, the upstream flow is different, because the upstream flow will meet problem of information conflict .

The former PON technology adopted TDMA for uplink , the time have to be divided then ONT can distinguish the uploaded data. So how ONT know to send the data? And how it know how long will it take to send the data? This requires an agreement between OLT and ONT to achieve the above functions. What will happen if the OLT assign a long time for the ONT? If the amount of data sent by ONT is relatively large, that is to say, the bandwidth of ONT is relatively large. And the ONT start to send data on the allocated time. However, it will waste the bandwidth when the ONT do not have data to send during the allocate time so other ONT which has large data to send cannot use the same time . This situation will inevitably bring rising costs. So GPON allocate bandwidth based on T-CONT.

With T-CONT, OLT is able to allocate bandwidth based on T-CONT. Of course, one ONT has multiple T-CONT, the benefits is it is able to allocate different type of T-CONT according to the different requirements of the business bandwidth. So T-CONT should have different types, currently there are four basic types of T-CONT: Fix, Assure, Not Assure and Best Effort (Max). They are used to represent different bandwidth allocation policies. What is the difference between them? To describe the difference, DBA has to be mentioned and please refer to another article in our website, Dynamically Bandwidth Assignment of OLT.

Product Features Of FA-EOLT8120A

Highly reliable case, strong adaptive capacity to environment

1U case,Good shielding measures.

Layer 2 aggregation switching

Layer 2 wire-speed forwarding; support rich layer 2 protocols

8K MAC address list

Uplink port supports electronic port modules and optical port modules, which can be configured flexibly as required

Perfect network management function

Support GUI based graphical interface

Support in-band management, out-of-band management

Support online upgrade of device software

Strong QOS function

Support flexible DBA, uplink and downlink traffic rate-limited

Support IP ToS, IEEE802.1p

Port based traffic control, traffic shaping

Supports up to 512 LLID

Rich OAM function

Support ONU automatic identification, automatic finding, and automatic registration

Support the function of automatic loop back test to single link

Strong VLAN function, including VLAN Stacking, Trunk, Translation

Support flexible controllable multicasting, support IGMP snooping

Product Parameters