Home Companies Shenzhen Fongko Communication Equipment Co.,Ltd

OEM 16 Core Black Horizontal Fiber FTTH Terminal Box For Home

Contact Us

[China]

Trade Verify

Address: Shengrui Building 2C-D, No. 868, Meilong Road, Longhua New District, Shenzhen, Guangdong, China

Contact name:Michael Liu

Shenzhen Fongko Communication Equipment Co.,Ltd

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

OEM 16 Core Black Horizontal Fiber FTTH Terminal Box For Home

Country/Region	china
City & Province	shenzhen guangdong
Categories	Mobile Phone Chargers

Product Details

Product Description

1,Description

The equipment is used as a termination point for the feeder cable to connect with drop cable in FTTx communication network system.The fiber splicing, splitting, distribution can be done in this box, and meanwhile it provides solid protection and management for the FTTx network building.

2,Features

(1)Total enclosed structure.
(2) Material: PC+ABS,wet-proof,water-proof,dust-proof,anti-aging, protection level up to IP65/66.
(3)Clamping for feeder cable and drop cable, fiber splicing, fixation, storage,
distribution...etc all in one.
(4)Cable,pigtails,and patch cords are running through their own paths without disturbing each other, micro type PLC splitter inst
allation,easy maintenance.
(5)Distribution panel can be flipped up, feeder cable can be placed by expression port,easy for maintenance and installation.
(6)Box can be installed by the way of wall-mounted or poled-mounted,suitable for both indoor and outdoor use.

3,Specification

(1)Environmental requirement
Working temperature:-40℃～+85℃

Relative humidity:≤85%(+30℃)

Atmospheric pressure:70KPa～106Kpa
(2)Main technical datasheet

Insertion loss:≤0.15dB
UPC return loss:≥50dB

APC return loss:≥60dB
(3)Thunder-proof technical datasheet
The insulation resistance between the grounding device and the metal parts of the box is no less than 2´104 MΩ/500V(DC)；IR≥2´104 MΩ/500V
The voltage resistance between the grounding device,and the box and its metal parts is no less than 3000V(DC)/min, no puncture,no flashover；U≥3000V