Home Companies Shenzhen Unifiber Technology Co.,Ltd

Indoor Hot Melt SC/APC FTTH Fiber Optic Quick Connector

Contact Us

[China]

Trade Verify

Address: 2F,Block 2, The Fourth Industry Park, ShuiTian Community,ShiYan,BaoAn Area,ShenZhen,China.

Contact name:Kerry Sun

Shenzhen Unifiber Technology Co.,Ltd

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

Indoor Hot Melt SC/APC FTTH Fiber Optic Quick Connector

Country/Region	china
City & Province	shenzhen guangdong
Categories	Radio & TV Broadcasting Equipment

Product Details

FTTH Hot Melt Connector, SC Fusion Splice-on Connector

Fusion Splice-on Connector is actually an optical fiber fusion, however the welding point is in the inner end of connector, which makes it no necessary for extra protection equipment, such as fiber protection plate(optical fiber splice tray), optical fiber terminal box, optical fiber distribution frame, after it finished splice fusion.The factory pre-polished ferrule eliminates the need for polishing, adhesives, and crimping in the field, which minimizes the potential for operator error and expensive connector scrap.Compared to mechanical optical fast connector, this new practical connector save V-groove mechanical connector maintenance and can improve the span life of welding point of connector and reduce maintenance cost.

Features

Easily installed, Quick and easy fiber termination in the field.

Fast connecting and repeat, No special tools needed when installed.

Low insertion loss and High return loss
Reliable, durability over 500 times mating
Low environmental sensitivity, adopt to complex environment

No epoxy and polishing required, No special tools needed when installed.

Reliable, durability over 500 times mating

Applications

FTTH & FTTx;
Passive Optical Networks;
Broadband, CATV.

ITEM	Technical Parameters
Applicable for	Drop cable / Indoor cable
Applicable for	0.9mm Tight Buffer Fiber, 2.0mm, 3.0mm Drop Cable
Optical fiber diameter	SM(9/125), MM(50/125, 62.5/125)
Optical fiber diameter	125μm ( 657A & 657B )
Tight buffer diameter	250μm
Fiber mode	Single mode
Operation time	About 100s(no fiber cut)
Insert loss	≤ 0.3dB(1310nm & 1550nm)
Return loss	> 50db(PC), > 55db(UPC), > 65db(APC)
Fastening strength of naked fiber	>5 N
Fastening strength of naked fiber holder	>10 N
Tensile strength	>50 N
Using temperature	-40~+75°C
On-line tensile strength (20 N)	IL ≤ 0.5dB RL ≤ 5dB
Mechanical durability (500 times)	IL ≤ 0.5dB RL ≤ 5dB
Drop-off test (drop-off height 4m,once per direction, totally 3 times)	IL ≤ 0.5dB RL ≤ 5dB