Home Companies SL RELIANCE LTD

FTTH ESC250d Field Assembly Quick Connector SC UPC Fiber Connector

SL RELIANCE LTD
Active Member

Contact Us

[China] country

Address: F401-404,No.27 Building,HENGGANG,YUANSHAN,LONGGANG,SHENZHEN, CHINA

Contact name:LISA

Inquir Now

SL RELIANCE LTD

FTTH ESC250d Field Assembly Quick Connector SC UPC Fiber Connector

Country/Region china
City & Province shenzhen
Categories Connectors
InquireNow

Product Details

 

 

FTTH ESC250d SC / UPC Field Assembly Quick Connector Fiber Optic Fast Connector

 

 

SL Fast Connector is a revolutionary field installable optical fiber connector that requires no epoxy and no polishing. The unique design of the patented mechanical splice body incorporates a factory-mounted fiber stub and a pre-polished ceramic ferrule. Using this onsite assembly optical connector, it is possible to improve the flexibility of optical wiring design as well as reducing the time required for fiber termination. The Fast connector series are already a popular solution for optical wiring inside buildings and floors for LAN & CCTV applications and FTTH.

 

Feature:


1.Low insertion loss
2.High return loss (low amounts of reflection at the interface)
3.Ease of installation
4.Low cost
 

 

Application:


1.CATV
2.Active device termination
3.Telecommunication networks
4.Metro
5.Local Area Networks (LANs)
 

 

 

   

Details:

Part NumberSL-F-FCN-51Length51 mm
Connector TypeSCPolishingUPC or APC
FerruleCeramicV-GroovePlastic material
Cable Diameters0.9/2.0/3.0 Simplex Cable 2x3 FTTH Drop Cable
Insertion Loss≤ 0.3dB (typical)
≤ 0.5dB (Max)
Return LossUPC ≥ 40dB
APC ≥ 50dB
Tension Strength≥ 30NOperationg Temp-40 ~ +75
3D Interfercometer (Only available if customer requested)
TypeRadius (mm)Apex offset (um)Fiber (nm)
PC (Φ 2.5mm )10 ~ 25≤ 70-100~+100
APC (Φ 2.5mm )5~ 15≤ 70-100~+100

 

 

 

Installation Introduction:

 

Assembly of the connector requires only normal fiber preparation tools: a fiber stripping tool, wipes and a fiber cleaver. They don’t need to polishing, no epoxy, No electrical power supply, no fused the fiber. Just Strip the buffer, cleave and clean the fiber and then insert the fiber into the Fast Connector. Installation takes just minutes and couldn't be easier.

 

• FTTH Drop cable stripper, To strip the Bow type 2x3mm Drop cable
• 0.9mm/2.0mm/3.0mm Fiber Cable Stripper. To Strip those round cable and bare fiber of 2x3mm Drop cable
• Fiber cleaver to cut the fiber of Cable&Fiber
• Use the Length guard board cut the fiber in requested length,.
• Alcohol, For Fiber Clean after cut
• Cleanroom Wipes, for Fiber Clean after Alcohol Cleaned.

 

Other Type of Connectors.

 

 

  

 

 

Hot Products

1x12 PLC Splitter SC / APC Box Type Fiber Coupler Splitter Box PLC Splitter is based on planar ...
4 WAY FIBER OPTIC MINI CARD PLC SPLITTER PLUG IN CARD CASSETTE SPLITTER LGX BOX Small Size and ...
1*2 BOX Type PLC Optical Fiber Splitter SC UPC APC SM Mini Plug-In Cassette Plc Splitter Mini plug...
China Factory 4Pairs Outdoor Indoor Use UTP FTP SFTP Waterproof CAT5 Network Lan CAT5e 305m Wooden ...
SC / APC - SC / UPC Indoor Optical Fiber Patch Cord Simplex SC Fiber Optic Cord Fiber Optic Patch ...
3M SINGLE MODE DUPLEX FC / UPC FIBER OPTIC JUMPER WIRE FIBER OPTICAL PATCH CORD​ The fiber optic ...