Active Member
|
[China]
Address: F401-404,No.27 Building,HENGGANG,YUANSHAN,LONGGANG,SHENZHEN, CHINA
Contact name:LISA
SL RELIANCE LTD |
|
|
Mini plug-in PLC splitter is now widely used in FTTx project, especially at the distribution points near the end users of the FTTx networks. It provides fast installation and low space requirement helping to alert the deployment of FTTs projects. Fiber pigtails for input and output can be directly connected with this passive component easily.
PLC Splitter is based on planar lightwave circuit technology.
SL 1x2 Fiber PLC Splitter can distribute or combine 1
optical signal into 16 outputs fibers.
Small Size and Compact Design:
Usually mounted in the FTTx box for fiber optic signal
distribution, saving time and space but still providing reliable
protection for fiber optic splitter
| Enviroment Conditions | ||
| Operationg Temperature | ℃ | -40 ~ +85 |
| Operationg Temperature | ℃ | -40 ~ +85 |
| Operating Humidity | %RH | ≤ 93 |
| Storage Humidity | %RH | ≤ 93 |
| Cable Info | |
| Fiber Type | G 657A |
| Pigtail Cable | 900 um |
| Connector | SC/APC |
| 2xN Splitter | Only Single Chip |
| Parameters | Specification | |||||
| Operating Wavelength (nm) | nm | 1260~1650 | ||||
| Channel Number | 1X4 | 1X8 | 1X16 | 1X32 | 1X64 | |
| Insertion Loss with Connector (Max) | dB | 7.5 | 10.7 | 13.7 | 17 | 20.7 |
| Insertion Loss without Connector (Max) | dB | 7.2 | 10.5 | 13.5 | 16.5 | 20.5 |
| Uniformity (Max) | dB | 0.8 | 1 | 1.4 | 1.7 | 2.5 |
| PDL | dB | 0.2 | 0.2 | 0.3 | 0.3 | 0.3 |
| Return Loss | dB | |||||
| Directivity | dB | |||||
| Packaging Dimension (LXWXH) | mm | 130*100*25 | 130*100*25 | 130*100*50 | 267*100*50 | 267*100*102 |
Application:
• Fiber Optic CATV;
• Fiber to the home (FTTH);
• Passive Optical Networks;
• Fiber communication systems;
• Local Areal Networks (LAN)
Feature:
· Low insertion loss
· Low Polarization Dependent Loss
· Excellent Environmental Stability
· Excellent Mechanical Stability
· Telcordia GR-1221 and GR-1209
· Available in dual/three wavelength operation
· Optional connectors termination upon request
· Available in 250um & 900um fiber, 2mm or 3mm
Advantages Of Fiber Optic Splitter
1. Adopt high strength stainless steel, pass salt spray test
2. Ferrule core is less than 0.2um
3. Adopt 100% new raw material, ROHS compliance
4. Low Insertion loss
5. Low PDL Compact Design
6. Good channel-to-channel uniformity
7. Wide Operating Wavelength: from 1260nm to 1650nm
8. Wide Operating Temperature: from -40℃ to 85℃
