Active Member
|
[China]
Address: F401-404,No.27 Building,HENGGANG,YUANSHAN,LONGGANG,SHENZHEN, CHINA
Contact name:LISA
SL RELIANCE LTD |
|
|
SC APC Fast Connector Single Mode Single SC Type Fiber Optic Connector APC Polish
Field Fast installation connector also be called Field fast installation connector or FIC. It is a new kind of connector that could be used in FTTH project scene.
Field Installable Connectors , was factory pre-polished that can eliminate the need of hand polishing in the Field. By the high end splice technology ,it make sure the fiber aligment in a high precision status. The factory cleaved fiber stub and the index-matching gel combine are offer an immediate low loss termination.
Applications:
1: FTTX Applications
2: Field repair or Field replacement
3:Premise or Enterprice Neworks
4:Patch Panels and other Equiment Termination
5: LAN and WAN connections
Feature:
1. Low insertion loss
2. High return loss (low amounts of reflection at the interface)
3. Ease of installation
4. Low cost
5. Reliability
6. Low environmental sensitivity
7. Ease of use
Details:
| Part Number | SL-G-FCN-51 | Length | 51 mm |
| Connector Type | SC | Polishing | UPC or APC |
| Ferrule | Ceramic | V-Groove | Plastic material |
| Cable Diameters | 0.9/2.0/3.0 Simplex Cable 2x3 FTTH Drop Cable | ||
| Insertion Loss | ≤ 0.3dB (typical)； ≤ 0.5dB (Max)； | Return Loss | UPC ≥ 40dB APC ≥ 50dB |
| Tension Strength | ≥ 30N | Operationg Temp | -40 ~ +75 ℃ |
| 3D Interfercometer (Only available if customer requested) | |||
| Type | Radius (mm) | Apex offset (um) | Fiber (nm) |
| PC (Φ 2.5mm ) | 10 ~ 25 | ≤ 70 | -100~+100 |
| APC (Φ 2.5mm ) | 5~ 15 | ≤ 70 | -100~+100 |
Installation Introduction:
Assembly of the connector requires only normal fiber preparation tools: a fiber stripping tool, wipes and a fiber cleaver. They don’t need to polishing, no epoxy, No electrical power supply, no fused the fiber. Just Strip the buffer, cleave and clean the fiber and then insert the fiber into the Fast Connector. Installation takes just minutes and couldn't be easier.
• FTTH Drop cable stripper, To strip the Bow type 2x3mm Drop cable
• 0.9mm/2.0mm/3.0mm Fiber Cable Stripper. To Strip those round
cable and bare fiber of 2x3mm Drop cable
• Fiber cleaver to cut the fiber of Cable&Fiber
• Use the Length guard board cut the fiber in requested length,.
• Alcohol, For Fiber Clean after cut
• Cleanroom Wipes, for Fiber Clean after Alcohol Cleaned.
Other Type of Connectors.
