Fuji Science & Technologies (Wuhan) Co., Ltd. |
|
LC PC / APC Fiber Optic Attenuator High Performance Max Operation Power 0.5W
As an optical passive devices, attenuators mainly used in
fiber optic to debug optical power performance & optical
instrument calibration correction & fiber signal attenuation to
ensure the optical power in a stable and desired level in the link
without any changes on its original transmission wave.
These fiber optic attenuators consist of a male LCA connector on
one end and a female LCA connector on the other end. When a cable
end in inserted into the female end, the remaining male end can be
connected to the equipment where the cable would otherwise connect
directly, but providing the desired signal strength reduction.
All Fuji attenuators are built with the highest quality materials
and factory tested to ensure precise attenuation and performance.
Application
Features
Specification
Attenuation value | 1 3 5 10 15 20 25 dB |
Attenuation Precision | 1~9 dB(±0.5dB) ≥10dB(±10%dB) |
Return Loss | PC>40dB APC>55dB |
Operation wavelength | 1310nm and 1550nm(SM) |
Polarization loss | ≤0.1dB |
Operation temperature | -40ºC~+70ºC |
Temperature (Unencapsulation) | 95%RH Apply to Telecordia standard (GR-910-CORE) |