Active Member
|
[China]
Contact name:Alston
Fiber Linker Communication Co.,Ltd |
|
|
Description
This Kind of HDMI fiber optic extender could support 4K@60 resolution super HD video which uses special transfer chip to transfer HDMI2.0 singal to 18G differential signal. It transmits the HDMI video signal over optical fiber module and fiber cable so as transmit HD media video to a long distance from 0-300meter by different optical module. This product is no loss, no delay HDMI 2.0 and 3D video. It also could transmit a reverse EDID, Support HDCP,720p/60Hz,1080i/60Hz,1080p/30Hz,1080p/60Hz, 1080p/120Hz resolution and so on. Support 7.1 PCM stereo audio, compatible with DVI signal. Support HDMI hot plug, low power consumption, long distance, plug and play
Features
| 1,Support resolution(Max): 3840×2160@60HZ(YUV4:4:4) |
| 2,Support HDCP, EDID |
| 3,Support HDMI2.0 connector and 3D |
| 4,Support 1-ch HDMI,1-ch bidirectional IR, duplex RS232 |
| 5,LC optical connector |
| 6,dual fiber, single mode |
| 7,HDMI transmission cable is up to 15m (without fiber transceiver) |
Sepecifications
| Video | |
| PC Max resolution | 3840×2160@60HZ |
| HD-DVD input max resolution | 720p/1080i/1080p/120Hz |
| Data rate | 18Gbps |
| Input/output TDMS | 1.65Gpbs |
| Input/output TDMS power level | 1.2volts p-p |
| Input DDC level | 5volts p-p (TTL) |
| Power Supply | |
| Power Consumption | 10W(max.) |
| Power Voltage | 12VDC |
| Optic | |
| Wavelength | 1310/1550nm |
| Output Optical Power | －9.5～－3dBm,average @1310nm |
| Receiver sensitivity | －10dBm,average @1310nm |
| Output Modulation Amplitude | 180μW |
| Input Modulation Amplitude | ≤15μW |
| Relative Speed | -116 DB/Hz |
| Return Loss | ≤10 dB |
| Rate of transmission | 18Gbps |
| Distance | 300M |
| Environment | |
| Working Temperature | -45℃~+70℃ |
| Storage Temperature | -60℃~+80℃ |
| Relative Humidity | 0~95%(non condensing) |
| Dimension | |
| Size | 160*85*20mm |
