Active Member
|
[China]
Address: (BJ-44) NO.04, Room 1, Floor 6, Phase I, Huazhong International Plaza, 182 Huangxiaohe Road, Jiang 'an District, Wuhan city
Contact name:He
Wuhan CS Tec Co.,Ltd |
|
|
Product introduction
UV laser marking machine adopts 355 ultraviolet light. The focused spot is so small that can largely reduce the material mechanical deformation and the processing heat effect is small. It is designed for customers who require higher effect of laser marking. It not only has good beam quality, small focal spot, but also can realize hyperfine marking. Based on its unique low power laser beam, UV laser marking machine provides non-contact marking with faster marking speed and better improve work efficiency.
Product features
♦Big cabinet space for air cooling, pure sheet metal, high-temperature painting, 2layers construction with heat resistance and high stability
♦Lockable cabinet in case of misoperation
♦No thermal effect and scorch problem
♦Fast marking speed and high efficiency, save human cost
Advantages
♦Aluminum travel system (with ball screw and on the Hiwin rails) accuracy standards
♦Air switch installed in machine (leakage protection, to prevent short circuits)
♦Focus Lens: Singapore imported lens, fine laser quality
Product specification
| Power | 3W 5W 10W optional |
| Laser source lifespan | 20000hours |
| Laser beam expander | Wavelength 4×*6× |
| Optical quality | ㎡ ≤ 2 |
| Repeat frequency | 20khz-100khz |
| Marking speed | ≤8000mm/s |
| Marking range | 110*110mm(standard) |
| Min. Characters | 0.1mm |
| Repeat precision | ±0.002mm |
| Power consumption | ≤300W |
| Voltage | Ac220v 50Hz 5A |
| Cooling mode | Air cooling |
| Supported characters | Any fonts downloaded on computer |
| Supported format | DWG,DFX,BMP,JPG,PNG,TIF,PCX,TAG,GIF,PLT etc. |
| Supported Bar code | CODE39, EAN, CODE128, Data Matrix, PDF417 etc. |
Configuration
| 1 | Laser source | UV laser source | 1set |
| 2 | Scanner | High standard UV scanner | 1set |
| 3 | Lens | 110*110mm | 1set |
| 4 | Software | Authorized | 1set |
| 5 | Computer | 2G RAM,500G, dual core CPU | 1set |
| 6 | Screen | 19” +Keyboard+Mouse | 1set |
| 7 | Adjust shaft | 1set | |
| 8 | Up and down Travel | 500mm height Automatic | 1set |
| 9 | Foot pedal | 1pc | |
| 10 | Working table | 65*80*79cm (1.6mm metal sheet, with lock function) | 1set |
| 11 | Computer hold | Aluminum, 180°stretching | 1pc |
| 12 | Foot base with casters | Caster with brake | 4sets |
| 13 | Air cooling system | 1set | |
| 14 | Marking card | Authorized | 1set |
| 15 | Power control | 1set | |
| 16 | Cable | 1set | |
| 17 | Operation manual | Manual and USB | 1set |
