Active Member
|
[China]
Address: 189# Longzhen Road,Cixi City,Ningbo,Zhejiang Province,China
Contact name:Kevin
Ningbo FET Building Materials and Technology Co.,Ltd |
|
|
UV Coated Decorative Waterproof Wood Grain Fiber Cement Board CE Exterior Wall Panel Fireproof 100% Free Asbestos
Product Introduction:
Wood grain fiber cement board is a stable performance and light weight building &decoration
board used cement as major
and natural fiber reinforced,with the process of pulping, emulsion,
forming, pressing, autoclaving, drying and surface
treatment.With the sanding surface,thickness uniformity is better
and grain is clearer. And because of the cement,the
strength is higher,and waterproof performance is much better.
Product | Wood Grain Fiber Cement Board |
Dry Density(g/cm3) | 1.3-1.4 |
Water absorption (%) | 28-33 |
Wet expansion (%) | 0.2 |
Water Content(%) | 7-13 |
Bending Strength(Mpa) | 18-22 |
Shrinkage rate(%) | 0.1-0.15 |
Frost resistant | No delamination and crack after 25cycles under freezing and thawing |
Water penetration | No water drop on the board surface after 24hours |
Product Application:
1) Commercial building: business building, entertainment facility,
shopping center and hotel.
2) Industrial building: factory, warehouse
3) Apartment building: hospital, theater, terminal station
Packaging Details:
Interior dry wall decoration board
Interior wall after painting and coating
Building partition board, suspended ceiling tiles
Fire rating requirement of partition wall and ceiling
Exterior wall cladding, roof lining board, lightweight grouting
wall panel
Specification:
1) Thickness:4.5-24mm;
2) 100% non-asbestos;
3) variety of colors,good appearance;
4) it can be sawed,planed,nailed,drilled;
Main Features:
1. Beautiful appearance
2. Good durability
3. Excellent fire-proof and moisture performance
4. Cold and high temperature resistance
5. Low expansion rate, low shrinkage, and no daformation
6. Easy processing and fixing
7. Environmental protection
8. Surface can be coated
9. Easy installation
Partition Installing Method:
1. Galvanized Metal Frame
a.The top and bottom keels are fixed respectively top floor and on
floor with expansion bolts.
b.The vertical keel should be aligned well according to the
requirement (generally being 612 mm) with
laterally supporting keel installed.
2. Board Material Package Fixed
a. Cutting the board material to the dimensions needed (about 10mm
lower than wall height)
b. Board material is fixed on keel in anchoring seam way with
tapping screw: the interval of tapping screw is generally
about 200~250mm with screws sinking 0.5mm under the board face.
c. The expansion seam of about 4mm between boards should be kept.
d. The shrouding should be fixed from the middle to the four sides
and cannot be operated at multipoint simultaneously
to avoid generating inner stress to make board material bucking.
e. Before board being packaged and fixed, depending the needs,
glass cotton or rock cotton can be filled.
