Active Member
|
[China]
Address: 189# Longzhen Road,Cixi City,Ningbo,Zhejiang Province,China
Contact name:Kevin
Ningbo FET Building Materials and Technology Co.,Ltd |
|
|
18mm Fiber Cement Sheet Australian Standard Tongue and Groove High Strength Light Weight Flooring
Main Features:
1. 100% Asbestos Free
2. Excellent Fire Resistant
3. Excellent Moisture / Water Resistant
4. Good Heat and Sound Insulation
5. High Strength
6. Stable Dimensions
7. Durability and long service life
Specification:
(1). Thickness: 18-24mm
(2). Standard size: 1220*2440mm or 1200*2400mm
(3). Note: other specification is available
Product Introduction:
Fiber Cement Board is a stable performance and light weight building &decoration board used cement as major and natural fiber reinforced, with the process of pulping, emulsion, forming, pressing, autoclaving, drying and surface treatment.With the sanding surface, thickness uniformity is better and grain is clearer. And because of the cement,the strength is higher, and waterproof performance is much better.
Product | Fiber Cement Board Flooring Panel |
Dry Density(g/cm3) | 1.2-1.3 |
Water absorption (%) | 33-40 |
Wet expansion (%) | 0.2 |
Water Content(%) | 13-18 |
Bending Strength(Mpa) | 16-20 |
| Shrinkage rate(%) | 0.1-0.15 |
Frost resistant | No delamination and crack after 25cycles under freezing and thawing |
| Water penetration | No water drop on the board surface after 24hours |
Packing:
1.Strong wooden pallet(Standard Export Package)
2.Corner protective
3.Plastic Film
4.Protect Board
Product Application:
It can be used for interlayer floor .It is an inorganic material with light weight, high density, high strength, high flatness, non-combustibility and non-radioactivity. It can be used for the interlayer floor of adding layer building, such as office and commercial residential building.
Installing Method:
1. We draw the installation guideline to define the fixing position, the center distance is 1200mm.
2. USe UC type keel hang fitting to link and fix the room and key keel, keep the key keel horizontal.
3. Use the caliper to vertically fix the sub keel on key keel,the center distance of the sub keels is 611mm.
4. TO install the horizontal keels as per the request,is center distance is 1222mm.
5. Use the tapping screw fix the woersen board on the sub-keel and do the treatment of the seam connection.
