Active Member
|
[China]
Address: 3 / F, Building A, Zhuolin Industrial Zone, Yankeng, Shiyan Town, Bao 'an District, Shenzhen City, Guangdong Province, China
Contact name:Jinsheng
shenzhen jie teshin communications equipment co. ltd |
|
|
Introduction
Wavelength Division Multiplexer (WDM) is the device which uses multiple optical maser to transmit multi beam of different wavelengths of laser technology through a single fiber. Each signal is transmitted in its unique channel after the data (text, voice, video and so on) modulated. WDM can increase the existing fiber infrastructure for phone companies and other operators.
Wavelength division multiplexing technology as a system concept, there are 3 modes, wavelength division multiplexing at 1310 nm and 1550 nm wavelength, CWDM (Coarse Wavelength Division Multiplexing) and DWDM (Dense Wavelength Division Multiplexing).
Coarse Wavelength Division Multiplexing (CWDM) is a type of optical wavelength management device that are based on proven ultra low-loss thin-film filter (TFF) technology. It features small size, high reliability, high extensibility, simultaneous transmission of multi-wavelength.
CWDM has gained prevalence in multi-wavelength digital transport architectures because it enables the use of very low cost uncooled distributed feedback (DFB) laser transmitters. Moreover, their powering requirements are reduced and reliability is increased.
Applications
Line monitoring
WDM network
Telecommunication
Cellular Application
Fiber optical amplifier
Access Network
Characteristics
Low insertion loss
Wide pass band
High channel isolation
High stability and reliability
Epoxy free on optical path
Specifications
| Operating wavelength(nm) | 1260～1620 | |
| Center wavelength Accuracy(nm) | ±0.5 | |
| Channel Spacing(nm) | 20 | |
| Channel Passband (@-0.5dB bandwidth) (nm) | ＞13 | |
| Insertion loss(dB) | Reflect channel | ≤0.6 |
| Pass channel | ≤0.4 | |
| Insertion loss variation(dB) | ＜0.3 | |
| Channel Ripple | ＜0.3 | |
| Isolation(dB) | Adjacent | ＞30 |
| Non-adjacent | ＞40 | |
| Insertion loss temperature sensitivity(dB/℃) | ＜0.005 | |
| Polarization dependent loss(dB) | ＜0.1 | |
| Polarization mode dispersion(ps) | ＜0.1 | |
| Directivity(dB) | ＞50 | |
| Return Loss(dB) | ＞45 | |
| Maximum power handling(mW) | 300 | |
Ordering Information
| CWDM | |||||
| Channel Spacing | Pass Channel | Fiber Type | Fiber Length | Connector | |
C=CWDM Grid
| 27=1270nm …… 47=1470nm 49=1490nm …… 61=1610nm | 1=Bare Fiber 2=900um Loose tube | 1=1m 2=2m 3=Customized | 0=None 1=FC/APC 2=FC/PC 3=SC/APC 4=SC/PC 5=ST 6=LC |
