HT-ODF12-A Optical Fiber Distribution Frame 

 
Product Specifications

 
 Product Description
ODF Optical Fiber Distribution Frame, also called ODF unit box, is designed with high density and large capacity. It has the characteristics of elegant appearance, reasonable distribution, easy search, easy management, easy installation and good operation. The ODF unit box has the functions of cable fixation and protection, cable termination, wiring adjustment, and cable core and pigtail protection. Apart from assembling into optical fiber distribution frame on its own, it can also fit into server cabinets/ server racks together with digital wiring unit and audio wiring unit to constitute a integrated distribution frame. The equipment is flexible in configuration, simple in installation, easy in maintenance and management. It is an indispensable equipment for fiber optic communication cable network terminal, fiber arrangement in relay point and skip fiber fusion and access.
Product Accessories
 

12 ports ODF accessories
Hose clamp*1	Cross recessed countersunk flat head screws*8	Single-core fused-fibre heat-shrinkable tube*12	Transparent hollow tube 1000mm	Fitting part*2

 
Product Introduction
Material:

1. The casing is made of 1.2mm cold rolled plate, which has gone through Epoxy Electrostatic Spraying Treatment, looking elegant and easy to use;
2. All plastic parts are made of corrosion - resistant materials;
3. The metal parts are treated by electrostatic spraying to increase their corrosion resistance;
4. The materials’ physical and chemical properties are stable and there is good compatibility between materials;
5. All materials are non - toxic, non - corrosive and have no side effects on human health and other equipment.

 
Casing color: white
 
Specification: 19 - inch Standard Installation ODF Unit Box
 
Mechanical property:

1. The combustion performance of plastic parts is compliant with GB51697-85;
2. The metal plate hole is coated with protective sheath for optical fiber to pass through;
3. The curvature radius of core and pigtail fibers is more than 37.5mm;
4. The curvature radius is 15 times greater than the diameter of the cable when the cable enters the chassis;

 
Installation method:

1. Installed into server cabinet/ server rack;
2. Installed on the wall.

 
 
Application:
FTTZ, FTTB, remote module bureau, small and medium wiring system of wireless base station.
 
★ Note: Special specifications can be customized according to customer requirements.
 
Product Classification
ODF optical fiber distribution frame is mainly divided into 12 cores, 24 cores, 48 cores, 72 cores, 96 cores and 144 cores.
 
Product Structure
The ODF unit box is composed of outer shell, support frame, collector disk, fixing device and optical fiber joint protector.

 
 
Product Features

1. Standard unit size. 19 inches wide, can be installed in server cabinet/ server rack and wall mounted.
2. Excellent workmanship.

1. The structure parts, made of cold-rolled steel sheets which are not only thickened but have also gone through zinc passivation treatment, apply the surface spraying technology.
2. The fiber distribution panel is made of plastic doped with flame retardant material, making them lightweight, flexible, strong and durable.
3. The design of large diameter coiling ring keeps the curvature radius of pigtail fibers and skip fibers above 40mm.

1. Apart from assembling into optical fiber distribution frame on its own, it can also fit into server cabinets/ server racks together with digital wiring unit and audio wiring unit. It has the functions of cable introduction, fixation and protection, fiber optic cable terminal and pigtail fiber fusion, wiring adjustment, and skip cable core and pigtail protection.
2. The optical fiber distribution frame adopts the draw structure, which can be pulled out during operation and put back after completion. At the rear of the frame, there are cable lead - in holes and solid state relay modules for fixing and introducing the cables.
3. The optical fiber distribute disk is openable upper and lower layer structure. Open the upper layer, after connecting the pigtail fiber optic connector to the lower adapter, winding along the support frame through the outlet hole to the upper layer, and then close the upper layer. After fusing the pigtail end with the introduced fiber core of the cable, fixing the fusing point in the slot and stick it, that’s when the operation is done. You can insert the distribution disk into the corresponding layer.
4. Below the distribution box is the skip fiber storage disk. Because each function module can be operated separately, it is flexible and convenient to use.
5. Suitable for FC, SC, LC and ST adapters.
6. Suitable for ribbon, bundle and non-ribbon optical cables.
7. Atmospheric pressure: 70Kpa~106 Kpa.

 
Product Functions

1. Fixation. After the optical cable enters the frame, its outer sheath and reinforcement core should be mechanically fixed, ground wire protection components should be installed, end protection treatment should be carried out, and the optical fiber should be grouped and protected.
2. Fusion. After fusing the introduced optical cable with the pigtail cable, the redundant fiber is coiled and stored, and the fused joint is protected.
3. Allocation. Connectors attached to the pigtail cable are plugged into the adapter to realize optical path docking with the optical connector on the other side of the adapter. The adapter and connector are able to be flexibly plugged in and out and the optical path is freely deployed and tested.
4. Storage. Provide storage for all kinds of cross-connected optical connectors between racks to enable them to be placed in a regular and orderly manner. There should be enough space in the optical fiber box to make the optical connection routing line clear, easy to adjust, and to meet the requirements of minimum bending radius.