Indoor / Outdoor Fiber Distribution Box 24 Cores

24 cores fiber terminal box / fiber enclosure / Fiber distribution box for SC , LC and suit for Fiber PLC splitter

The FDB is made of high strength materials, UV resistance,waterproof,maximum capacity up to 24cores,with perfect space design, a variety of PLC splitter can be installed, it can be used in indoor and outdoor environment, safe,reliable ,cost-effective, and provide the best solutions for FTTH optical access networks.

Specifications

Main points during operation

①Insert on 12-24 cores small diameter cable and fix it for mid-span,insert one 6-12 cores small diameter cable and fix it for branching,the mid-span fiber coiling in the bottom.

② Fix two 1:8 cassette PLC Splitter and plug the pigtail in the input adaptor of the splitter.See figure 3.

③ Connect input fiber with splitter input pigtail by fusion splicing or mechanical splicing at splice tray,and reserved fiber coiling in the splice tray. See Figure 4.

④ Pre-insert drop calbes to outlet holes in order,then seal it by soft block and fix it..

See Figure 5.

⑤ Pre-installed the field assembly connector of drop cable,then insert connector to adaptor in order and tie it.See Figure 6.

⑥If use bare PLC splitter,check Figure7,Figure 8.

⑦Pole mounting: use the hose clamp to fix it on the pole.See Figure 9.

⑧Wall mounting: use the expansion screws to fix it on the wall. See Figure 10

List of accessories.