Home Companies Wuhan Ouyi Optoelectronic Technology Co., Ltd.

TX1330DFB Laser RX1270nm Fiber Optic Transceiver Module 10Gbps Ethernet BIDI LC 60KM SFP+

Wuhan Ouyi Optoelectronic Technology Co., Ltd.
Active Member

Contact Us

[China] country

Address: No. 40 Gaoxinsi road, Donghu high-tech zone, Wuhan, 20 buildings 4003, Gezhouba solar city

Contact name:Guoshou Fu

Inquir Now

Wuhan Ouyi Optoelectronic Technology Co., Ltd.

TX1330DFB Laser RX1270nm Fiber Optic Transceiver Module 10Gbps Ethernet BIDI LC 60KM SFP+

Country/Region china
City & Province wuhan hubei
InquireNow

Product Details

                        TX1330DFB Laser RX1270nm Fiber Optic Module 10Gbps Ethernet BIDI LC 60KM SFP+

 

Applications

 

Computer cluster cross-connect

Custom high-speed data pipes

High-speed storage area networks

 

PRODUCT FEATURES

 

Up to 40km on 9/125um SMF

perating case temperature: 0 to 70 °C

ll-metal housing for superior EMI performance

Low power consumption, less than 1.5w

10Gb/s serial optical interface compliant to 802.3ae 10GBASE-ER/EW

Electrical interface compliant to SFF-8431 specifications for enhanced 8.5 and 10 Gigabit small form factor pluggable module “SFP+”

1330nm DFB transmitter ,1270nm PIN-TIA

Advanced firmware allow customer system encryption information to be stored in transceiver

Cost effective SFP+ solution, enables higher port densities and greater bandwidth

2-wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface for optical transceivers

 

PRODUCT DESCRIPTION

 

The SFP+10G modules offer customers a wide variety of 10 Gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications.It is a mallest 10G form factor Supports 10GBASE Ethernet and OTU2/OTU2e .

 

The SFP+10G module electrical interface is compliant to SFI electrical specifications. The transmitter input and receiver output impedance is 100 Ohms differential. Data lines are internally AC coupled. The module provides differential termination and reduce differential to common mode conversion for quality signal termination and low EMI. SFI typically operates over 200 mm of improved FR4 material or up to about 150mmof standard FR4 with one connector.

 

SFP+10G modules Complaint with IEEE 802.3ae 10GBASE-LR,Electrical interface compliant to SFF-8431 specifications for enhanced 8.5 and 10 Gigabit SFP module “SFP+”,1330nm DFB transmitter, PIN photo-detector,LC connector,2-wire interface for management specifications compliant with SFF 8472 digital diagnostic, Compliant with SFF8472 Digital Diagnostic Standard(DDM)

 

Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). They simultaneously comply with Gigabit Ethernet as specified in IEEE STD 802.3 and 1x Fibre Channel as defined in FC-PI-2 Rev. 10.0 .

 

Specifications
 
ParameterSymbolMin.Typ.Max.UnitNotes
Maximum Supply VoltageVcc3-0.5-4.0V 
Storage TemperatureTS-40-85°C 
Operating Humidity-5-95% 
Maximum Supply VoltageVcc3-0.5-4.0V 
ParameterSymbolMin.Typ.Max.UnitNotes
Power Supply VoltageVcc3.133.303.47V 
Power Supply CurrentIcc--300mA 
Case Operating TemperatureTop0-70°C 
Data Rate--10.3125-Gb/s 
9/125um G652 SMFLmax--20Km 

 

 

 

 

 

 

 

 

 

 

Spec

 

ParameterSymbolMinTypMaxUnitRef.
Transmitter
Output Opt. PowerPO0 5dBm 
Side-Mode Suppression RatioSMSR30  dB 
RMS Spectral Width(-20dB)σ  1nm 
Optical Extinction RatioER3.5 4.5 dB 
Tx Jitter(SONET)20KHZ-80MHZTxj1  0.3UI3
Tx Jitter(SONET)4MHZ-80MHZTXj2  0.1UI3
Path penalty at 800ps/nm@9.95Gb/s   2dB 
Relative Intensity NoiseRIN  -128dB/Hz 
Center Wavelengthλc132013301340nm 
Receiver
RX Sensitivity @10.3 Gb/sSENS  -16dBm1,2
Receiver Overload -1  dBm 
Optical Center WavelengthλC1260 12701280nm 
LOS De-AssertLOSD  -17dBm 
LOS AssertLOSA-30  dBm 
LOS Hysteresis 0.5 2 6dB 

Notes:

1. Measured with conformance signals defined in FC-PI-2 Rev. 10.0 specifications.

2. Measured with PRBS 231-1 at 10-12 BER.
3. GR-253-CORE Issue 4.
4. With optical input power at the receiver between -1 ~ -11dBm

 

 

 

Hot Products

1.25Gb/S SFP Fiber Optic Module TX1550nm RX1310nm Single Mode BIDI 20KM PRODUCT DESCRIPTION 1.25Gbps ...
10G Ethernet 40KM SFP+ Fiber Optic Module 1330nm/1270nm LC BIDI Logo Customized PRODUCT FEATURES ...
TX1330DFB Laser RX1270nm Fiber Optic Module 10Gbps Ethernet BIDI LC 60KM SFP+ Applications Computer ...
Four - Channel 40Gbps 850nm Fiber Optic Module MMF QSFP+SR4 Up to 150m Distance PRODUCT FEATURES Low ...
25Gbps 850nm Fiber Optic Module MMF SFP28 SR Up to 100m Distance PRODUCT FEATURES Supports 25.78Gb/s ...
25Gbps 1310nm Fiber Optic Module SMF SFP28 LR Up to 10KM dual LC fiber Applications 25GBASE-LR ...