Lp-PLA2 Rapid Test Kitevaluate The Degree Of Atherosclerosis Inflammation And The Auxiliary

【Product name】LP.pdf

Diagnostic Kit for Lipoprotein-Associated Phospholipase A2(Immunochromatographic assay)

[Intended Use]

The product is applicable to in vitro quantitative test of concentration of lipoprotein phospholipase A2 (Lp-PLA2) in whole blood, plasma and serum of human body.

[Applicable Instrument]

NIR-1000 dry fluoroimmunoassay analyser produced by WWHS Biotech. Inc

【Test procedure】

1. Before the test, please read the instructions completely. If the test card and sample are stored in cold storage, they should be balanced at room temperature (15-30)℃ for not less than 30min before use.
2. Start NIR-1000 dry fluoroimmunoassay analyser and correctly select the corresponding sample type on the instrument.
3. Take out the ID card, make sure that the batch number of the ID card is consistent with that of the test card, and insert the ID card into the ID card port of the instrument.
4. Take out the test card from the aluminum foil bag and use it within 15 minutes.
5. Place the test card on a clean horizontal table and mark it horizontally.
6. Mix 10 µL of sample with 600µL of sample diluent. Apply 100 µL of diluted samples to the well of the test card.
7. At 10 minutes after addition of samples, insert the test card into NIR-1000 dry fluoroimmunoassay analyser and click the “Instant test” button to read the results.