Home Companies DONGGUAN WECARE MEDICAL STECH CO.,LTD

Professional Dust Face Mask , multi - layer Dust Protection Ffp2v Face Mask

DONGGUAN WECARE MEDICAL STECH CO.,LTD
Active Member

Contact Us

[China] country

Address: Building 2, No.18, Shangdong Road, ShanXia, Hengli Town, Dongguan city, Guangdong Province, P.R.China

Contact name:Jacky LO

Inquir Now

DONGGUAN WECARE MEDICAL STECH CO.,LTD

Professional Dust Face Mask , multi - layer Dust Protection Ffp2v Face Mask

Country/Region china
City & Province dongguan guangdong
InquireNow

Product Details

CE FFP2 Respirator Mask , Valved Dust Mask , With Valve With Carbon ,EN149:2001+ A1 : 2009

 

 

1 . Mask CE Quality Standards

 

CE Standard for Disposable Respirators
EN: 149:2001 + A1:2009
DistinguishFilter EfficiencyPenetrationResistant
FFP1 NR≧80%< 20%< 21mmH2O
FFP2 NR≧94%< 5%< 24mmH2O
FFP3 NR≧99%< 1%< 30mmH2O

 

                                1 . Stardard : EN : 149 : 2001 + A1 : 2009

                                2 . Test Machine : TSI 8130

                                3 . Test Flow : 95Liters/Min

                                4 . Test Medium : NACL & DOP

2 . Descriptions

MX-2008 FFP2V Dust Mask with Steel nose clip,two head straps.In compliance with the norm EN 149:2001+A1:2009 ,PPE III CATEGORY and Shell-shaped.Have 4-plys, PP spunbond outer layer,actived carbon fiber filtration middle layer,PP meltbrown high filteration layer(94%), PP spunbond inner layer.

 

3 . Warning

  • The user should be trained in the fitting and should be aware of the instructions for using prior to donning the respirator.
  • Use in adequately ventilated areas,which are not deficiency of oxygen.
  • Do not use this respirator when oxygen concentration is less than 19.5%.
  • Do not use the mask in explosive environment.
  • The mask must be fitted correctly to ensure the level of protection expected is achieved.
  • The facila hairs or heards and certain facial charactrtistics may reduce the effectiveness of the mask.
  • For mask mark marked “NR”,the particle filtering half mask shall not be used for more than one shift.

 

4 . How to use?

  • Cup respirator in one hand with nosepiece at fingertips,allow headbands to hang freely below hand.
  • Hold respirator under chin,with nose piece up
  • Locate the upper strap across the crown of the head and the lower strap below the ears.
  • Strap must not be twisted
  • Using both hands,mould nose clip to the shape of the lower part of the nose to ensure a close fit and good seal.Pinching the nose clip using only one hand may result in less effective respirator peformance.
  • The seal of the respirator on the face should be fit-checked before entering the workplace.
  • If the user feels the bottom strap is too loose and it is not possible to achieve a satisfactory fit of the mask a knot can be tied in the strap.

 

 

5 . Discard and replace the mask if:

  • The mask is removed whilst in the contaminated area.
  • Clogging of the respirator causes breathing difficulties.
  • The mask becomes damaged.
  • For respirators protecting against vapours,the smell of vapours present becomes derectable.

 

6 . More pictures

 

 

 

 

Hot Products

FFP2V Standard Facial Save Mask ,Valved Dust Mask , Disposable Dust Mask With CE Certificate 1 . ...
CE Approved FFP3 Standard Respirator Mask ,Valved Dust Mask , Non-Woven Polypropylene 1 . Certificat...
CE FFP3V Foldable Mask ,Valved Dust Mask ,EN149: 2001 +A1: 2009 Approved 1. Applications Cutting and ...
CE Standard FFP3V Save Mask , Valved Dust Mask , Filtering Face-Piece Respirator​ 1 . Descriptions : ...
CE FFP2 Respirator Mask , Valved Dust Mask , With Valve With Carbon ,EN149:2001+ A1 : 2009 1 . Mask ...
FFP2 Vertical Fold Flat Mask , Valved Dust Mask , CE Standard Facial Disposable Mask 1 . Packing The ...