Home Companies Jiangsu Ying Yan Fastening System Technology Co.Ltd

DIN137 GB860 Curved Spring Washers Stainless Steel Alloy Steel Plain / Galvanization

Jiangsu Ying Yan Fastening System Technology Co.Ltd

Contact Us

[China] country

Trade Verify

Address: No.888 Longjiang Road,Lili Town,Wujiang District,Suzhou City

Contact name:Wang

Inquir Now

Jiangsu Ying Yan Fastening System Technology Co.Ltd

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

DIN137 GB860 Curved Spring Washers Stainless Steel Alloy Steel Plain / Galvanization

Country/Region china
City & Province suzhou
Categories Furniture Locks
InquireNow

Product Details

Din137 Gb860 Curved Spring Washers Stainless Steel Sus304 Alloy Steel 65mn Plain/Galvanization/Blacked/Dacromet

Curved spring washers, also known as wave washers or Belleville washers, are thin, disc-shaped metal components with a convex or concave curvature. They are designed to provide a controlled preload or spring force when compressed between two surfaces. These washers are often used in mechanical assemblies to adjust, preload, or compensate for dimensional variations.

Here are some key points about curved spring washers:

  1. Materials: They are typically made from spring steel or stainless steel, depending on the application requirements.

  2. Function: When compressed, curved spring washers provide a spring force that can be used to preload bearings, joints, or fasteners. This preload can help reduce vibrations, maintain constant tension, or compensate for wear.

  3. Advantages:

    • They offer a high spring rate compared to other types of springs.
    • They can be stacked in series or parallel to achieve desired preload forces.
    • They are relatively compact and easy to install.
  4. Applications:

    • In precision equipment, to provide consistent preload and minimize variations in performance.
    • In bolted joints, to compensate for dimensional changes due to temperature or loading.
    • In bearings, to preload the bearing and maintain proper contact between the rolling elements and raceways.
  5. Design Considerations:

    • The curvature and thickness of the washer determine its spring rate and preload force.
    • The washer material must be compatible with the environment and resist corrosion.
    • Stacking multiple washers can achieve higher preload forces, but also increases the overall height.
  6. Installation: Curved spring washers are installed between two flat surfaces, typically by placing them under a bolt head or nut. As the bolt is tightened, the washer is compressed, providing the desired preload force.

It's important to note that curved spring washers should be used with caution and according to the manufacturer's recommendations to ensure proper performance and prevent damage to the assembly.

 

Nominal Diameter
1 1.2 1.4 1.7 1.8 2 2.3 2.6
d min=nominal size
max
dc Nominal Size
max
min
h Nominal Size
max
min
H min
max
per 1000 units ≈ kg
1.1 1.3 1.5 1.8 1.9 2.2 2.5 2.8
1.35 1.55 1.75 2.05 2.15 2.45 2.75 3.05
2.5 3 3 4 4 4.5 5 5.5
2.8 3.3 3.3 4.375 4.375 4.875 5.375 5.875
2.2 2.7 2.7 3.625 3.625 4.125 4.625 5.125
0.2 0.2 0.25 0.25 0.25 0.3 0.3 0.3
0.22 0.22 0.27 0.27 0.27 0.33 0.33 0.33
0.18 0.18 0.23 0.23 0.23 0.27 0.27 0.27
0.35 0.35 0.4 0.45 0.45 0.5 0.5 0.55
0.7 0.7 0.8 0.9 0.9 1 1 1.1
0.006 0.009 0.01 0.02 0.02 0.028 0.035 0.041
Nominal Diameter
3 3.5 4 5 6 7 8 10
d min=nominal size
max
dc Nominal Size
max
min
h Nominal Size
max
min
H min
max
per 1000 units ≈ kg
3.2 3.7 4.3 5.3 6.4 7.4 8.4 10.5
3.5 4 4.6 5.6 6.76 7.76 8.76 10.93
6 7 8 10 11 12 15 18
6.375 7.45 8.45 10.45 11.55 12.55 15.55 18.55
5.625 6.55 7.55 9.55 10.45 11.45 14.45 17.45
0.4 0.4 0.5 0.5 0.5 0.5 0.5 0.8
0.45 0.45 0.55 0.55 0.55 0.55 0.55 0.86
0.35 0.35 0.45 0.45 0.45 0.45 0.45 0.74
0.65 0.7 0.8 0.9 1.1 1.2 1.7 2
1.3 1.4 1.6 1.8 2.2 2.4 3.4 4
0.063 0.088 0.14 0.222 0.247 0.265 0.476 1.05

Hot Products

DIN472 65Mn Black Dacromet Retaining Rings For Bores - Normal Type Φ35-Φ98 Retaining Rings for Bores ...
NF E 25-511 Conical Knurled Spring Washers, Symbol CS Alloy Steel 65Mn Dacromet Characteristics: ...
NF E 25-511 Conical Knurled Spring Washers, Symbol CS Stainless Steel SUS304 Plain Characteristics: ...
NF E 25-511 Conical Knurled Spring Washers, Symbol CS Alloy Steel 65Mn Zinc Plating Characteristics: ...
Din137 Gb860 Curved Spring Washers Stainless Steel Sus304 Alloy Steel 65mn Plain/Galvanization...
DIN 9021 ISO 7093-1 Plain Washers - Large Series Carbon Steel Q195 Galvanization Characteristics: ...