ISO 13918(PT) DIN 32501GA Weld Studs For Capacitor Discharge
Welding - Type PT Carbon Steel Stainless Steel SUS304
Features
- Welded Connection: The DIN 32051 bolt is designed with a welded end that can be
directly welded to the base material, providing a strong
connection.
- Full Thread: The entire shank of the bolt is threaded, providing a larger
connection area and higher load-bearing capacity.
- High Precision: The thread dimensions and precision of the bolt conform to the
DIN 32051 standard, ensuring compatibility and reliability with
other threaded components.
- Material Diversity: Depending on the application requirements, bolts made from
different materials, such as carbon steel and stainless steel, can
be selected.
Advantages
- High Strength: The welded connection and full thread design give this bolt high
strength and stability.
- Corrosion Resistance: Stainless steel bolts exhibit good corrosion resistance, suitable
for harsh environments.
- Easy Installation: The welding connection simplifies the installation process and
improves work efficiency.
- Reusable: If the bolt is not damaged, it can be reused by welding again.
Applications
- Bridges and Building Structures: In heavy-duty structures like bridges and buildings, the DIN
32051 bolt is used to connect steel plates, beams, and other
load-bearing components, ensuring structural stability and safety.
- Mechanical Engineering: In the manufacturing of machinery, pressure vessels, pipelines,
and other equipment, this bolt is used to connect and fix various
components, ensuring the normal operation of the equipment.
- Petrochemical Industry: In the petrochemical industry, the DIN 32051 bolt is commonly
used to connect pipes, valves, flanges, and other components,
enduring high pressure and temperature challenges.
- Power Industry: In power facilities such as power plants and substations, the
bolt is used to fix and connect electrical equipment, cables, and
other components, ensuring the reliability and safety of power
transmission.
Screw Thread
d | |
| P | Pitch | | dk | Nominal Size | | max | | min | | dp | Nominal Size | | max | | min | | z | Nominal Size | | max | | min | | h | | n | max | | α | ±1° |
| | 0.5 | 0.7 | 0.8 | 1 | | 4.5 | 5.6 | 6.5 | 7.5 | | 4.7 | 5.8 | 6.7 | 7.7 | | 4.3 | 5.4 | 6.3 | 7.3 | | 0.65 | 0.65 | 0.75 | 0.75 | | 0.73 | 0.73 | 0.83 | 0.83 | | 0.57 | 0.57 | 0.67 | 0.67 | | 0.55 | 0.55 | 0.8 | 0.8 | | 0.6 | 0.6 | 0.85 | 0.85 | | 0.5 | 0.5 | 0.75 | 0.75 | | 0.7~1.4 | 0.7~1.4 | 0.8~1.4 | 0.8~1.4 | | 1.5 | 1.5 | 2 | 2 | | 3° | 3° | 3° | 3° |
|
