Active Member
|
[China]
Address: 9F,Zhong guang building,NO22 Ya yuan Road Bantian,Long Gang District,Shenzhen,China
Contact name:Karen
Shenzhen Wellcam Co., Ltd. |
|
|
8 Inch Ai Facial Recognition Temperature Scanner Terminal Attendance System
8 Inch Access Control Ai Face Recognition Terminal Attendance System Temperature Screening Machine
Description of Temperature Kiosk With Facial Recognition
Face recognition temperature check kiosk on the basis of providing face recognition identity access rights management,at the same time,it realizes the functions of non-contact body temperature detection,rapid screening,automatic alarm and automatic detection of whether the mask is worn or not.
Functions of Body Temperature Scanning Kiosk
1. Face recognition
2. Mask detection
3. Non-contact temperature detection
4. Measurement accuracy up to ±0.4°C
5. Warning if abnormal body temperature is detected
6. Support 24,000 face capacity and 160,000 face recognition records
Application of Temperature Scanning Kiosk
Bank
School
Hotel
Building
Store
Smart community
Technical specification:
| Model | B2002FR-8I-CM-RF-QR-BTK-L06 | |
| Hardware | ||
| Processor | Dual Core Processor + 1G memory + 16G flash | |
| Operating system | Linux Operating system | |
| Viewing angle | Vertical viewing angle: 30°;Horizontal viewing angle: 30° | |
| Sensor | 1/2.8" Progressive Scan CMOS | |
| Lens | 6mm | |
| Card swiping module | 13. 56MHz | |
| QR code Scanning module (optional) | 640 (horizontal) X 480 (vertical) CMOS,horizontal viewing angle 31°,support QR code,PDF417,EAN13,EAN8,UPC-A and other one-dimensional codes,two-dimensional codes | |
| Speaker | voice playback content can be customized | |
| Temperature measurement performance |
Please find the notes on last page | |
| Measurement range | 16℃ - 40℃ (Indoor without wind) | |
Temperature measurement Lens | European original lens | |
| Sensors type | Medical-grade European imported sensors | |
| Measurement accuracy | ±0.3℃ | |
| Temperature resolution | 0.1℃ | |
| Temperature measurement distance | ≤30cm | |
| Measurement response time | 300ms | |
| Performance | ||
| Recognition height | 1.2~2.2 meters,angle adjustable | |
| Recognition distance | 0.2~1.5 meters,depends on lens | |
| Recognition angle | Vertical viewing angle: 30°;Horizontal viewing angle: 30° | |
| Recognition time | Less than 0.3 seconds | |
| Storage capacity | 160,000 capture records | |
| Face capacity | 24,000pcs | |
| Screen luminance | ≥400cd/m2 | |
| Interface | ||
| Switching output | 1 way switch output,other GPIO port can be customized | |
| Network interface | 1 RJ45 10M / 100M adaptive Ethernet port,Gigabit Ethernet port can be customized | |
| Wiegand interface | 1ch Wiegand interface input/output | |
| Communicate interface | 1ch RS485 interface | |
| USB interface | 1ch USB 2.0 interface | |
| Camera | ||
| Camera | Dual cameras | |
| Effective pixels | 2MP,1920*1080 | |
| Min Illumination | Color 0.01Lux @F1.2(ICR);B/W 0.001Lux @F1.2 (ICR) | |
| SNR | ≥50db(AGC OFF) | |
| WDR | 110db | |
Resolution | Main stream | 50Hz: 25fps (1920×1080,1280×720) |
| 60Hz: 30fps (1920×1080,1280×720) | ||
| Sub stream | 720*576,1-25(30)fps/640*480,1-25(30)fps 320*240,1-25(30)fps | |
| Function | ||
| Web side configuration | Support | |
| Remote upgrade | Support | |
| Deployment | Support LAN,WAN | |
| Regular | ||
| Operating temperature | -30℃ - +60℃ | |
| Working humidity | 0～90% relative humidity,no condensation | |
| Salt spray | Level Rp6 or above | |
| Antistatic | Contact ±6KV,air ±8KV | |
| Power | DC12V/2A | |
| Waterproof | IP42 | |
| Power | 20W(MAX) | |
| Screen size | 8 inches IPS HD screen | |
FAQ:
Q: Do you sell at retail?
A: Sorry,we are factory and it’s need technical person to install it,so we are not sell to personal user directly,thanks.
Q: Do you provide SDK/API for secondary development?
A: Of course,customized service is our advantage.We could provide SDK/HTTP/MQTT(integrate cloud) for integration.included firmware customization.
Q: What's the MOQ of product?
A: 1PC for the sample order;After tested sample order,the MOQ is 10pcs/Model.
Q: What are your terms of payment?
A: We accept Paypal,Western Union and TT before production.
Q: Could you provide OEM/ODM for customers?
A: Sure,we provide full OEM&ODM service,Like Logo printed,carton box design ect.Our engineer could design the OSD menu as request.If for more questions,welcome to contact us for further discussion,thanks.
Q: What's the delivery time?
A: Sample order about 2-7 working days;Normal order about 6-12 working days;Bulk order can about 10-25 working days.It's depend on the quantities.
Q: What's the warranty and support?
A: All the goods be checked before dispatch.We provide 2 years warranty after the shipment date.
We have professional technical support team to support our customers,and if you have any question for the technology of our products,please email or chat with us by skype,thank you in advance.
