Active Member
|
[China]
Address: 9F,Zhong guang building,NO22 Ya yuan Road Bantian,Long Gang District,Shenzhen,China
Contact name:Karen
Shenzhen Wellcam Co., Ltd. |
|
|
Real Time Smart Hd WIFI Video Doorbell Anti Theft Door Intercom Phone
Real-Time Video Cloud Storage Wireless Wifi Video Doorbell Door Intercom Phone
Description of Wifi Smart Video Doorbell
Wireless IP Video Intercoms offer a great solution for all your entry needs.The device allows you to talk with visitors and remotely operate entrances through an installed app on your smart device.Providing you have a good internet connection you will receive a video call from which you can have 2-way talk,a clear video stream and it’s easy to operate your entrance.
Functions of WIFI Video Doorbell Camera:
1. 2.4G WiFi
2. Anti-theft design
3. 1080P Full HD
4. Two-way talk
5. PIR Motion Detection
6. Anti-theft design
Full-duplex audio
When the visitor push the doorbell button,you will get a call.You can see and hear the visitor in your app if you answer.
Motion detection
Motion sensors will notify you when movement is detected.
Record
Record every moment using high capacity Micro SD card storage
Technical specification:
| Sensor type | 1/3" CMOS |
| Pixel | 2.0Mega |
| Min illuminance | Color 0.01Lux@F1.2 Black and White 0.001Lux@F1.2 |
| View angle | 130° |
| Shutter | 1/25~1/100,000 per second |
| IR | High power LED with ICR |
| WDR | Digtal WDR |
| Video compression standard | H.264 , H.265 |
| Video compression standard | 32Kbps~2Mbps |
| Max picture size | 1920 X 1080 |
| Frame rate | 1~25 per second |
| Audio | Full duplex audio |
| Storage | Support Micro SD card (Max. 128G),Cloud Storage |
| Image setting | Support HD/SD；support mirror |
| Reset | Support |
| Interface protocol | Private |
| Communication protocol | TCP/IP,HTTP,DHCP,DNS,RTSP |
| General function | Dual stream, password protection |
| Wifi | IEEE802.11b/g/n |
| Optional accessories | Wireless Chime |
| Triggering | Support button triggering , Motion Detection |
| Working temperature and humidity | -20℃~50℃,humidity less than 90% (without condensation) |
| Power supply | Support AC/DC 12~24V |
| Water proof | IP55 |
| Size(mm) | 116*45*27MM |
| Weight(g) | 90g |
Q: What should I pay attendance to when doing product testing?
A: First of all,you’d better read our manual carefully.If you do not understand the content,please consult our customer service.Our goal is to satisfy you with this transaction.Most importantly,when you connect a doorbell to a phone,you must place the phone at least five meters away from the machine and then make speak and record.This will not cause signal interference,will not produce noise.
Q: When does the product need to be reset?how to reset it?
A: It needs to be reset when the product can’t connect to the phone,There is a description on the first page of the manual,and the key step is to connect when you see the red light start flashing.
Q: In the network process,the process bar is always not 100%,add failure?
A: This camera only support 2.4GHz WiFi router,please make sure you are using a 2.4GHz WiFi router.And confirm the WiFi password again.
Q: Repeated additions are failures?
A: After adding a failure,it’s recommended to restart the device or power off,and then try to add again.
Q: The device can not be previewed properly?
A: Check whether the network is normal,you can place the doorbell close to the router,and if not,it is recommended to reset the device and add it again.
Q: How to cut the doorbell network to another router?
A: First remove and reset the device on the APP and then configure the device again by the app.
Q: Why I can not get the notifications with my cell phone APP?
A: Please confirm that the APP has been running on the phone,and the relevant reminder function have been opened.
