Active Member
|
[China]
Address: No.377 Changbang Road, Wujiang Economic and Technological Development Zone
Contact name:Chuanchuan Li
jiangsu jzer Automation Technology Co.,Ltd. |
|
|
Industrial Disposable Mask Making Machine With Automatic Slicing
Automatic mask production line, also known as one to three mask production line, composed of a mask body machine and three ear band composed of welding machine. Compared with the single independent type mask making machine, joined the automatic conveyor belt and the connecting port, the unique design in addition to improve the production efficiency, reduce artificial cost, is in order to minimize the artificial participation, and reduce the risks of a mask is pollution in the production process.
Main Features
1 . Stable , high-yielding , universal
2 . It can be changed the mold to produce different specifications and shapes of the fish shape body mask
3 . Good stability
4 . Using the ultrasonic welding technology to weld the beautiful and neat pattems ,welding spot is well-distributed, the mold and the ultrasonic wave have long lifetime .
5 . Easy to operate ,high degree of automation
Features
1. Aluminium alloy structure is adopted, which is beautiful and firm without rust.
2. Computer PLC programming control, high stability, low failure rate and low noise.
3. Servo motor imported from Taiwan, stepper motor drive, high precision.
4. Photoelectric detection of raw materials to avoid mistakes and reduce waste.
5. This equipment can supply 2 inner ear strap machines or outer ear strap machines.
6. The machine adopts pulleys and fixed feet, which is convenient and fast to move, strong in fixation and unshakable.
7. This model is equipped with a new advanced conveyor belt, which automatically collects products with high accuracy, and only needs to be sorted and packed.
technical parameter
1. The length, width and height of the machine: the size of the whole machine is subject to the actual 6500MM * 3500MM * 1600MM
2. Voltage: AC220V 50-60HZ
3. One-to-two production efficiency: more than 100 pieces / min
4. Power: 3.5KW
technical parameters:
Import raw materials, automatic feeding, nose line cutting / feeding, hemming welding, folding scene, forming welding, photoelectric detection, automatic slicing, finished product output, receiving tray sorting, full automation
No. | Name | Parameter |
| 1 | size | 6500 (length) * 3500 (width) * 1950 (height) |
| 2 | Weight | Total equipment weight ≤5000KG Ground load 3500KG / ㎡ |
| 3 | Color | Color Sheet metal warm gray 1C, primary color of aluminum profile |
| 4 | Working power supply | 220VAC ± 5% 50HZ grounding protection Rated power ≤10KW (including welding machine) |
| 5 | Compressed air | 0.4-0.6MP (clean water after dewatering, no oil, filtration, pressure stabilization), use flow rate is about 300L / min |
| 6 | Production efficiency | ≥100PCS/min |
| 7 | The product qualification rate | 99% (except for the original material and human operation) |
| 8 | Main accessories | Cylinder: AirTAC Screw guide rail: HIWIN / TBI PLC: Mitsubishi or Xinjie |
| 9 | Operating environment | General workshop environment is acceptable (no corrosive odor, no dust) |
Item | Material | Specification | Coil outer diameter | Coil inner diameter |
| 1 |
Outer non-woven fabric |
200mm wide roll material |
Recommended less than 600mm |
greater than 65mm |
| 2 |
Inner layer non-woven fabric |
190mm wide roll material |
Recommended less than 600mm |
greater than 65mm |
| 3 |
Melt tape |
175mm wide roll material |
Recommended less than 600mm |
greater than 65mm |
| 4 | Nose bridge strip | 3.0mm wide roll material |
Recommended less than 400mm |
greater than 65mm |
| 5 | ear straps | 2.8mm round coil |
