5 Gallon Pc Hdpe Water Bottle Making Extrusion Moulding Blow Molding Machine

Features & Advantages

1 . Accumulator are compound in the main body which can avoid the explosive fissile convergence line which is result from parision combined in the material-storage-on-top accumulator;

2 . The new platform design for the die head, the lifting platform and headrising separated from each other, not only making the rise of the die head more stable, but also the die head can move forwards and backwards.

3 . According to the double pump, proportion flow valve, the power consumption can be decrease;

4 . Automatic lubrication system;

5 . It also has down blow pin, down widen device, double clamping and robot hand;

6 . It could be optional configured with tele maintenance system;

7 .  No contamination and low noise with the air cylinder to drive the action instead of the oil pump.

8 .  Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.

9 .  Strong clamping force with high pressure and double crank links to lock the mold.

10 . Two ways of operating: automatic and manual.

11 . Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.

12 .The maximum blow volume is 20L,PE,PP,PS,PC,PVC can be used, suitable for production of chemical barrels,auto parts and sprayer etc.