Zhangjiagang U Tech Machine Co., Ltd |
|
Automatic 5l plastic lubricant oil drum blow moulding machine
Introduction
Automatic bottle blow molding machine was specially designed for
making plastic water bottles, lubricant oil bottles,detergent
bottles ,cosmetic bottles, and other plastic containers not over
5L.
Extrusion blow molding is a procedure through which the plastic is
melted and extruded into a hollow tube. Later the parison is
captured by closing it into a cooled metal mold. Then air is blown
into the parison, expanding it into the shape of hollow container,
bottle or any other part. When the plastic get properly cooled, the
mold is opened and ejected from the part. The most common extruded
materials are Acrylic, Polyester, Polycarbonate, PVC, Polystyrene,
Polyethylene, etc. The two variations of Extrusion Blow Moulding
are Continuous and Intermittent.
Feature
1) It is suitable for producing PE,HDPE,PP, PVC,PETG,PS so
on,plastic containers and bottles in all shapes are available,the
max.product volume is up to 5L.
2) Double station single/double die head design,very easy to
operate and maintenance.
3) Most components of the blow moulding machine are from famous
world brand.
4) Fully automatic process with low power consumption,high
efficiency,quick and safe operation,easy for maintenance.
5) Multiple screw available for double layer or tranparent liquid
lever line.
6) Auto deflashing device available,can remove the extra parts of
bottles.
7) Auto lubricant system controlled by PLC. Oil pump From Japan
YUKEN driving the machine Japanese Mitisubishi PLC Used to control
all electrial components and touch screen Single die head Stable
and easy to maintenance This device is able to remove the extra
parts of products Perfect product Save your manual Cost. This part
is the full electric components of the machine.
Parameter
Max Product Volume | 5 L |
Target Material | LDPE/HDPE/PP/PVC/PETG |
Machine Size | 3.8x2.2x2.4 m |
Machine Weight | 5.5 Tons |
Voltage Suitable | Customer Specified |
Screw Diameter | 70 mm |
L/D Ratio | 24:1 |
Barrel Heating Power | 14.2 KW |
Extrusion Motor Power | 22 KW |
Plasticizing Capacity | 90 KG |
Platen Size | 320x390 mm |
Opening Stroke | 150~500 mm |
Max Mould Size | 350x390 mm |
Head No. | 1 |
Central Distance | 160 mm |
Heating Zone No. | 2+1 |
Head Heating Power | 5.7 KW |
Total Power | 52 KW |
Average Energy Consumption | 31.5 KW |
Compressed Air Needed | 0.6 Mpa / 1.0 m3 |
Cooling Water Needed | 4.5 m3/H |
Loading Reference | 20’GP |