|
[China]
Trade Verify
Address: Zhutian, Xiaogang, Beilun, Ningbo, China
Contact name:Levi.Li
Ningbo Qiming Machinery Manufacturing Co., Ltd. |
|
Verified Suppliers
|
|
|
High 2x3L Bottle Extrusion Blow Molding Machine Double Station MP80FD
Brief introduction
Mold clamping structure adopting advanced four shafts to clamp the mold ,Can clamp the mold firmly ,stable and reliable ,central mold platen is provided with protruding structure ,binging convenience to installing and dismantling molds, making the design human friendly
Piling out system adopting high performance transducer to drive ,saving power by above 30%,can be equipped with 100points wall ,thickness control ,Adopting foreign famous brand MOOG, improving the uniformity of the finished products ,lowering the weight of the finished products ,Flow and pre-sure proportional control valve. consuming less power ,high output ,of high performance price Ratio.
With self-functioned and stable PLC control system ,as well as the integrative of the machine ,electric devices and hydraulic digital controlled and temperature control of PID have been achieved ,The equipment’s operation speed and stability have been greatly improved ,Friendly operational panel ,easy, convenient
All the process are controlled by electromagnetic valves.
1) Left blow pin blowing: Electromagnet T21 of left blow pin blowing valve is connected. Blowing begins through pressure relief valve. Air valve electromagnet T21 is disconnected and venting begins.
2) Right blow pin blowing: Electromagnet T22 of right blow pin blowing valve is connected. Blowing begins through pressure relief valve. Air valve electromagnet T22 is disconnected and venting begins.
3) Cutter: Electromagnet T23 of cutter air valve is connected. Cutter moves forward. Air valve is disconnected after cutting material. Cutter is repositated. Cylinder action speed can be controlled by throttle valve.
4)deflashing system:the cutter is connected with T24.T25, Cutter in, after finishing deflesh, cutter is unconnected, cutter is reset, throttle valve can adjust the speed of air cylinder
5) The volume of head blowing is controlled by pressure regulating valve.
| Parameters | MP80FD |
| Material | PE PP PVC PA… |
| Max container capacity | 10L |
| Number of die | 1,2,3,4,6 |
| Machine Dimension(LxWxH) | 3.3x5.5x2.8m |
| Total weight | 12ton |
| Clamping force | 150kN |
| Platen openning stokes | 240-620mm |
| Toggle stokes | 600mm |
| Max mould size(WxH) | 550x430mm |
| Screw diameter | 80mm |
| Screw L/D ratio | 24 L/D |
| (HDPE) Plasticizing capacity | 108kg/h |
| Screw heating zone | 4 zone |
| Screw heating power | 15.6kw |
| Screw fan power | 0.14kw |
| Extrusion motor power | 30kw |
| Die head heating zone | 8 zone |
| Power of die heating | 10.3kw |
| Total power of machine | 92kw |
| Power of oil pump motor | 31kw |
| Air pressure | 0.6-0.8 Mpa |
| Average energy consumption | 61kw |
| Consumption compression air | 1.2m³/min |
| Consumption cooling water | 80L/min |
Standard Features:
Auto Lubrication
Water Cooled Modular Blow Pin
Hot Wire Cutting
Positioning Hole For Quick Mold Change
Adjustable Die head
Linear Transducer
FRL(Filter Regulator Lubricator) for Pneumatic
Proportional Hydraulic System fro better control
Swing and Adjustable Extrusion Platform
