Double Station High Speed Blow Molding Machine MP70D-2 For Two
Colors Grading Bottle
Introduction:
MP70D is specifically designed for making bottles from 50ml up to
maximum 5L. It is hydraulic driven with accrate eletrical control
system. MP70D has double stations to increase the production
efficiency. Also, it has variety of choice of die heads. With more
than 10 years of success in the market, MP70D is updated to be one
of the most reliable and popular model in the world.
MP70D Double station blow molder with horizontal linear mould
shuttle |
| Length: | 3600mm | ![](http://img.everychina.com/nimg/fc/ca/ed5ecdba5a166787ddbebb5367ca.jpg)
|
| Width: | 2200mm |
| Height | 2360mm |
| | |
Key Data | | MP70D |
| | mm |
Linear mould stroke | A | 450 |
Mould Width | B | 430 |
Mould Length | C | 350 |
Mould Thickness | D | 190 |
Opening Stroke | E | 290 |
| | | | |
Platen daylight | D+E | 480 | | |
Clamping Force | | 75kN | | |
Dry Cycle | | 7 sec. | | |
Centre Distance | 2x2 fold | 160 | | |
| 2x3 fold | 120 | | |
| 2x4 fold | 100 | | |
| 2x6 fold | 60 | | |
| | | | |
Extruder | | φ70 | φ75 | φ80 |
Screw Speed | r/min | 0~65 | 0~65 | 0~65 |
Screw Diameter | mm | 70 | 75 | 80 |
Screw L/D Ratio | L/D | 24 | 24 | 24 |
| | | | |
Energy Requirements | | | | |
Extruder Inverter Power | kW | 18.5 | 22 | 30 |
Extruder Moter Power | kW | 18.5 | 22 | 30 |
Srew Heating Power | kW | 12.7 | 14.4 | 15.85 |
Fan Power | kW | 0.14X2 | 0.14X2 | 0.14X2 |
Oil pump Motor Power | kW | 9.5 | 9.5 | 9.5 |
Total Power of Machine | kW | 49.14 | 54.34 | 63.79 |
Air Requirement approx | m3/min | 1.2 | 1.2 | 1.2 |
Air Working Pressure | Mpa | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 |
| | | | |
Cooling Requirements | | | | |
Consumption Cooling Water | L/min | 40 | 40 | 40 |
Blowing device
This machine is down blowing. The blowing pin moves up and down by
oil cylinder fixed on blowing base. The blowing pin tip connected
to blow mould neck ring, blows into mould cavity and forces
products to be expanded. The blow pin tip and mould neck ring cut
the neck of the bottle to make them smooth.
It is mainly made up of blow pin oil cylinder, blow base, blowing
pin and blow pin tip.