|
[China]
Trade Verify
Address: Zhutian, Xiaogang, Beilun, Ningbo, China
Contact name:Levi.Li
Ningbo Qiming Machinery Manufacturing Co., Ltd. |
|
Verified Suppliers
|
|
|
Single / Double station Roller ball PP blow molding machinery MP70D with high speed
Features
Double station/Single station
Brief introduction:
Adopt hydraulic system drive,linear transducer movement for carriage up and down,fully automatic lubrication system with self-detector function.This model is popular use for small products below 2L.
project for eye drop 10ml, 4 head,production capacity :38000pcs/24hours
Advantage:
1. Most important for a good EBM machine is the action system and the extrusion system.
we'r using powerful hydraulic system design with imported valve and pump for stable action
Adopt China famous brand Gearbox along with Delta extrusion motor ,make sure machine runs continiously,long life
2. Heavy and stong structure,make sure machine works more faster and stable.
3. Special protection for the machine and people
Sensor in the operating door: if anybody enter the machine,the electricity conneced with the machine will automatic cut down.
Temperature interlock system:When the material inside the barrel is not reaching the setting temperature,the extrusion motor can never start.that will help the screw and head of the machine.
4. Special care for different countries.
we offer some special design for different countries,in order to matching best performance.
5. Easy die head dis-assemble and assemble
6. Defleshing function included
| MP70D Double station blow molder with horizontal linear mould shuttle | ||||
| Length: | 3600mm |
| ||
| Width: | 2200mm | |||
| Height | 2360mm | |||
| Key Data | MP70D | |||
| mm | ||||
| Linear mould stroke | A | 450 | ||
| Mould Width | B | 430 | ||
| Mould Length | C | 350 | ||
| Mould Thickness | D | 190 | ||
| Opening Stroke | E | 290 | ||
| Platen daylight | D+E | 480 | ||
| Clamping Force | 75kN | |||
| Dry Cycle | 7 sec. | |||
| Centre Distance | 2x2 fold | 160 | ||
| 2x3 fold | 120 | |||
| 2x4 fold | 100 | |||
| 2x6 fold | 60 | |||
| Extruder | φ70 | φ75 | φ80 | |
| Screw Speed | r/min | 0~65 | 0~65 | 0~65 |
| Screw Diameter | mm | 70 | 75 | 80 |
| Screw L/D Ratio | L/D | 24 | 24 | 24 |
| Energy Requirements | ||||
| Extruder Inverter Power | kW | 18.5 | 22 | 30 |
| Extruder Moter Power | kW | 18.5 | 22 | 30 |
| Srew Heating Power | kW | 12.7 | 14.4 | 15.85 |
| Fan Power | kW | 0.14X2 | 0.14X2 | 0.14X2 |
| Oil pump Motor Power | kW | 9.5 | 9.5 | 9.5 |
| Total Power of Machine | kW | 49.14 | 54.34 | 63.79 |
| Air Requirement approx | m3/min | 1.2 | 1.2 | 1.2 |
| Air Working Pressure | Mpa | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 |
| Cooling Requirements | ||||
| Consumption Cooling Water | L/min | 40 | 40 | 40 |
Standard Features:
Auto Lubrication
Water Cooled Modular Blow Pin
Hot Wire Cutting
Positioning Hole For Quick Mold Change
Adjustable Die head
Linear Transducer
FRL(Filter Regulator Lubricator) for Pneumatic
Proportional Hydraulic System fro better control
Swing and Adjustable Extrusion Platform
| OPTIONAL FUNCTION |
| COLD CUTTER |
| DEFLESHING SYSTEM(MACHINE SYSTEM+STEEL BACK PLATEN AND PNEUATIC CYLINDER) |
| HYDRAULIC DEFLESHING SYSTEM |
| BOTTLE ROTATION TOP CUT OFFLINE |
| BLADE NECK ROTATION CUTTING ONLINE INSTALLED/OFF LINE SEPARATE |
| HYDRAULIC FILTER |
| MECHANICAL FILTER |
| LEAK TEST MC ON/OFF LINE |
| ROBOT TAKE OUT |
| IML(IN MOULD LABELING SYSTEM) |
| 2 YEAR SPARE PARTS WARRANTY |
| SCRAP MATERIAL CONVENYOR |
| BOTTLE CONVENYOR AROUND THE MACHINE OR CUSTOM DESIGN |
| POST COOLING SYSTEM |
| SIDE WATER REGUAR 12IN-12OUT WITH FLOW CONTROL |
| PARISON CONTROL SYSTEM MOOG 100PTS |
| SPECIAL SCREW AND BARREL FOR SPECIAL MATERIAL |
| SPECIAL PROGRA FOR SPECIAL PRODUCTS AND MOULD DESIGN |
LOADING DEVICE,MASTER BATH MIXING DEVICE |
