|
[China]
Trade Verify
Address: Zhutian, Xiaogang, Beilun, Ningbo, China
Contact name:Levi.Li
Ningbo Qiming Machinery Manufacturing Co., Ltd. |
|
Verified Suppliers
|
|
|
Plastic Bottle Blow Molding Machine MP70D-1 For African Water Pot
Introduction:
MP70D is specifically designed for making bottles from 50ml up to
maximum 5L. It is hydraulic driven with accrate eletrical control
system.
Mould opening, closing, rack placing, pen inserting and lifting of
this machine are achieved by hydraulic control. As to working
process and action principle of hydraulic system, please refer to
principle figure of hydraulic system(see Figure1.4) and function
introduction.
1. System structure: It is made up of oil pump motor, oil pump,
valve plate, oil valve, cooler, oil tank and oil cylinder.
1) Oil pump V4 single pump: When oil cylinder need rapid action,
oil pump will supply sufficient oil by high pressure. When oil
cylinder need slow action, oil pump will supply little oil by low
pressure.
| MP70D Double station blow molder with horizontal linear mould shuttle | ||||
| Length: | 3600mm |
| ||
| Width: | 2200mm | |||
| Height | 2360mm | |||
| Key Data | MP70D | |||
| mm | ||||
| Linear mould stroke | A | 450 | ||
| Mould Width | B | 430 | ||
| Mould Length | C | 350 | ||
| Mould Thickness | D | 190 | ||
| Opening Stroke | E | 290 | ||
| Platen daylight | D+E | 480 | ||
| Clamping Force | 75kN | |||
| Dry Cycle | 7 sec. | |||
| Centre Distance | 2x2 fold | 160 | ||
| 2x3 fold | 120 | |||
| 2x4 fold | 100 | |||
| 2x6 fold | 60 | |||
| Extruder | φ70 | φ75 | φ80 | |
| Screw Speed | r/min | 0~65 | 0~65 | 0~65 |
| Screw Diameter | mm | 70 | 75 | 80 |
| Screw L/D Ratio | L/D | 24 | 24 | 24 |
| Energy Requirements | ||||
| Extruder Inverter Power | kW | 18.5 | 22 | 30 |
| Extruder Moter Power | kW | 18.5 | 22 | 30 |
| Srew Heating Power | kW | 12.7 | 14.4 | 15.85 |
| Fan Power | kW | 0.14X2 | 0.14X2 | 0.14X2 |
| Oil pump Motor Power | kW | 9.5 | 9.5 | 9.5 |
| Total Power of Machine | kW | 49.14 | 54.34 | 63.79 |
| Air Requirement approx | m3/min | 1.2 | 1.2 | 1.2 |
| Air Working Pressure | Mpa | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 |
| Cooling Requirements | ||||
| Consumption Cooling Water | L/min | 40 | 40 | 40 |
