Home Companies Vican Explosion Proof Technology Co.,ltd

Plastic Explosion Proof Control Station , Flameproof Control Station Box

Vican Explosion Proof Technology Co.,ltd
Active Member

Contact Us

[China] country

Address: Room 403, Building 1, No.89 CuiBai Road, Haishu District,Ningbo ,China.

Contact name:Wu

Inquir Now

Vican Explosion Proof Technology Co.,ltd

Plastic Explosion Proof Control Station , Flameproof Control Station Box

Country/Region china
City & Province ningbo zhejiang
Categories Other Chargers
InquireNow

Product Details

 

 

local control station explosion proof , control station box flameproof

 

 

 

Description:

 

1.To prevent arcing of enclosed device from causing ignition of a hazardous atmosphere external to the        enclosure
2.In conjunction with magnetic starters or contactors for remote control of motors
3.Manual motor starters are used:
For manual starting of small AC/DC motors
To provide manual starting and stopping and motor running protection
4.Reduce installation problems
5.Eliminate external seals
6.Lower installation costs
7.Improve safety

8.Are used with general purpose snap and pushbutton type switches

 

Techinical parameters:

 

Rated voltageAC220/380V
Rated current10A
Using typeAC-14, DC-13
Protection gradeIP65
corrosion-proof gradeWF2
Inlet threadG3/4"
Cable outer diaΦ9mm~Φ14mm
 

 

Application:

 

1. Can be used in hazardous areas: Zone 1 and Zone 2 .

2. Can be used in explosive gas atmospheres of Category IIA and II B IIC where the temperature classification is T6.

3. Two type of Ex d(IIB) and complex(IIC).

4. Flammable dust atmosphere.

5. Widely using in the fields of oil, chemical industry , spaceflight ,war industry and so on.

 

The gas field is divided into three areas: Zone 0, Zone 1 and Zone 2:

 

Zone 0: A site where explosive mixtures in an explosive atmosphere occur continuously in the form of gases, vapors or mists or exist for long periods of time.

Zone 1: A site where explosive mixtures of gas, vapour or mist may occur in an explosive atmosphere during normal operation. Zone 1 is a typical application site for explosion-proof electrical equipment.

Zone 2: In normal operation, explosive mixtures in the form of gases, vapors or mists are unlikely to occur in explosive atmospheres, and if present, are only occasional and short-lived locations. Usually, "short time" means that the duration is no more than 2 hours

Hot Products

Hazardous location control stations , dust-Ignoring control box Description: Hazadous location ...
Master control station explosion-proof corrosion-proof for hazardous location Features: 1.Momentary ...
explosion proof operating post 380V electrical for gas atmosphers Description: Explosion proof ...
weather proof zone control station and anti-dust control box for dangerous area Description: The ...
local control station explosion proof , control station box flameproof Description: 1.To prevent ...
Explosion proof pendant station start stop push button control box Description: Explosion proof ...