Zone1 / 2 Start Stop Start Stop Control Box , Push Button Control Station For Hazardous Area

start stop push button control station for hazardous area zone1/ 2

Description:

Explosion proof control stations are designed to contain and extinguish explosions. The cast aluminum housing and bolts can withstand explosion pressures. The contact surface between top and bottom is wide to allow for combustion gases to cool down, pass through, and release pressure without igniting any explosive environment.

Explosion proof control unit - Start / stop push button, 2 gang, CNEX certified. 2 gang standard control station, start (green I) and stop (red) pushbuttons c/w 1 x normally open or normally closed contact, IP65 glass fibre reinforced polyester enclosure. explosion protection: Ex II BGD, Ingress protection: IP 66, Ambient temperature: -20 ºC .....+40ºC, Cable entries: as your need

More info

Explosion proof CNEX start / stop push button control station unit.

2 gang standard control station

Start (green I) push button c/w 1 x normally open contact and Stop (red O) push button c/w 1 x normally closed contact

Glass fibre reinforced polyester enclosure

Atex hazardous area zone 1, zone 2, zone 21 and zone 22 certified

Explosion protection: Ex II B GD

Ingress protection: IP 65

Ambient temperature: -20 ºC .....+40ºC

Cable entries: as your need

Technical details

Actuator - top Momentary pushbutton with insert: Green "I"

Actuator - bottom Momentary pushbutton with insert: Red "O"

Contacts 1 x normally open and 1 x normally closed

Enclosure material Polyester resin, glass fibre reinforced

Rate voltage upto 690V – 50/60Hz

Rated current 16A

Ingress protection: IP65

Cable entries as your need (bottom face)

Gasket PU foam

Cover fixing screws captive M4 stainless steel socket head cap screw

Operating temperature -20°C to +40°C ambient (-50°C to +60°C upon request)

Overall dimensions H 140mm x W 80mm x D 85mm approx.. (excluding cable gland)

Weight

0.5 kg