|
[China]
Trade Verify
Address: Room 107,No.1218, Zhongshan Ave., Tianhe, Guangzhou, China
Contact name:KOKO XIAO
Guangzhou Huilian Machine Equipment Co., Ltd. |
|
Verified Suppliers
|
|
|
Demolition Hydraulic shear
It is suitable for demolition and crushing of concrete structure
and brick structure buildings. The root with special steel sheet,
is conducive to steel shear, recovery.
Main Features:
1. The adoption of special slewing support provides stable
perfomance.
2. The shear uses imported steel material,with double-layer wear
-resisting protection,high strength amd long service life.
3. The strcution is optimized by design and hai large shear.
12 15 18Tons Excavator Attachment Hydraulic Demolition Shear for E110 E120 E180 Building Demolition
| Company | Guangzhou Huilian Machinery Equipment Co,.Ltd |
| Brand | Huilian |
| Product Name | Excavator Hydraulic Demolition Shear |
| Condition | 100% new |
| Part Model | HL150JQ-2 HL200JQ-2 HL300JQ-2 HL350JQ |
| Main product | Excavator parts and Hydraulic breaker parts |
| MOQ | 1PCS |
| Warranty | 6-12 Months |
| Delivery Terms | After got your payment |
| Payment Terms | T/T,PayPal,Ali Pay,West Union,Bank Transfer |
| Shipping Methods | DHL,FEDEX,EMS,UPS,by sea |
Our Hydraulic Demolition Shears Product Parameter
| Item/Model | Unit | HL150JQ-2 | HL200JQ-2 | HL300JQ-2 | HL350JQ |
| Overall Length | mm | 2050 | 2350 | 2350 | 2590 |
| Maximum Opening | mm | 740 | 900 | 910 | 1100 |
| Blade length | mm | 160 | 180 | 180 | 180 |
| Rotating flow | L/min | 30-50 | 40-60 | 40-60 | 40-60 |
| Rotating pressure | kg/cm2 | 100-130 | 110-130 | 110-150 | 110-150 |
| Operate flow | L/min | 150-180 | 160-200 | 160-200 | 180-260 |
| Operate pressure | kg/cm2 | 220-250 | 280-320 | 280-320 | 280-350 |
| Weight | kg | 1310 | 2200 | 2300 | 2800 |
| Head shear force | ton | 55 | 72 | 72 | 90 |
| Middle shear force | ton | 85 | 116 | 116 | 152 |
| Root shear force | ton | 160 | 268 | 268 | 288 |
| Suitable Excavator | ton | 12-18 | 18-24 | 24-36 | 36-40 |
Product maintenance
1. Daily checkpoints
Whether there is any damage or deformation of the body, whether
there is leakage of the hose connection,pin and bushing damage
check and its replacement cycle, check the loosening state of bolts
and nuts, check the oil level and loosening of the gear and tighten
the loosening bolt.
2. Regular checkpoints
The seals and rotating parts of the hydraulic cylinder will wear
out, and should be replaced in time after reaching the service
life. Replacement parts should be matched with the original
factory.
Product Warranty Details As Following
| Part name | Warranty period | Warranty scope |
| Main part | 12 months | Steel plate cracking in 3 months, replacement of cracking parts.more than 3 months within 6 months of steel plate cracking company to provide maintenance, the company does not bear any other costs. (Damages caused by non-compliance with the operation specifiCATEEEEions are not within the scope of compensation for cracking caused by reinforcement without the consent of the company).6-12months, provide maintenance, the company does not bear any other costs. |
| pivoting support | 6months | Free replacement of new products within 3 months of rotation support fracture, free maintenance within 6 months. If lubriCATEEEEing oil is not added according to regulations, oil seal replacement time is exceeded, and regular maintenance is poor, the rolling body and rollaway nest are stuck and corroded, which are not within the scope of claim, and the tooth wear in the ring is not within the scope of warranty. |
| Oil cylinder | 6months | Oil seal leakage within 3 months, free of charge oil seal, cylinder and piston rod cracking and fracture free of charge replacement of new products, free maintenance within 12 months for any problems, only charge for the replacement of accessories. The freight of return to factory shall be borne by oneself. |
| Motor | 6months | Shell cracking company provides free maintenance within 12 months, return to the factory to bear the freight. Output shaft fracture is caused by excessive pressure or illegal operation, so it is not covered by warranty. Oil leakage of more than 3 months is not within the scope of claims must be purchased by their own oil seals. |
| pipeline | 3months | The manufacturer is not responsible for the damage caused by improper maintenance and excessive adjustment of the pressure of the overflow valve after external force collision. |
| The valve block | 3months | Foreign bodies in the hydraulic oil, over the oil seal replacement time, poor regular maintenance, user error, external impact, stuck and strain after a month, ,are not within the scope of claim. |
| blade | 1month | Blade edge, slag, scratches, replace new. Breakage, loss, and due to operation, not covered by warranty. |
| All kinds of bolts, shaft pins, joints, foot switches are not guaranteed, all broken parts are not covered by warranty. | ||
