|
[China]
Trade Verify
Address: Room 107,No.1218, Zhongshan Ave., Tianhe, Guangzhou, China
Contact name:KOKO XIAO
Guangzhou Huilian Machine Equipment Co., Ltd. |
|
Verified Suppliers
|
|
|
EC140 EC210 EC240 EC290 EC350 EC360 Hydraulic Demolition Excavator Shears For 21ton 36tons Excavator
Demolition Hydraulic shear
It is suitable for demolition and crushing of concrete structure and brick structure buildings.
The root with special steel sheet, is conducive to steel shear, recovery.
Selling point:
The cutting mouth adopts imported material, with wear-resisting
welding wire, and the pattern design is more wear-resisting and
beautiful.
The body adopts Q355B manganese plate design with high strength,
light weight and good wear resistance.
Two times of paint, thickness 40-50min fine paint surface, rust
proof.
The cylinder is thickened and lengthened for greater shear force.
CNC head boring process with high accuracy, high concentricity,
more durable.
Its unique design and innovative way to ensure efficient operation
and strong cutting force, powerful cylinder to strengthen the mouth
closing force to shear hard concrete.
Suitable for demolition of all buildings, concrete crushing, root
with steel sheet, conducive to steel shear, recycling.
EC140 EC210 EC240 EC290 EC350 EC360 Hydraulic Demolition Excavator Shears for 21ton 36tons Excavator
| Company | Guangzhou Huilian Machinery Equipment Co,.Ltd |
| Brand | Huilian |
| Product Name | Excavator Hydraulic Demolition Shear |
| Condition | 100% new |
| Part Model | HL150JQ-2 HL200JQ-2 HL300JQ-2 HL350JQ |
| Main product | Excavator parts and Hydraulic breaker parts |
| MOQ | 1PCS |
| Warranty | 6-12 Months |
| Delivery Terms | After got your payment |
| Payment Terms | T/T,PayPal,Ali Pay,West Union,Bank Transfer |
| Shipping Methods | DHL,FEDEX,EMS,UPS,by sea |
How to make product maintance?
1. Daily checkpoints
Whether there is any damage or deformation of the body, whether
there is leakage of the hose connection,pin and bushing damage
check and its replacement cycle, check the loosening state of bolts
and nuts, check the oil level and loosening of the gear and tighten
the loosening bolt.
2. Regular checkpoints
The seals and rotating parts of the hydraulic cylinder will wear
out, and should be replaced in time after reaching the service
life. Replacement parts should be matched with the original
factory.
3. Check the tightening state of bolts and install new bolts. Check
and ensure that the bolts tightened are not loose after 8 hours of
use. The damaged bolts should be replaced in time. Bolts should be
replaced after approximately 1500 hours or 12 months of use after
installation.
4, in the process of use, it is recommended to check regularly
whether there is oil leakage to ensure no fault, so as not to
affect the normal use.
Every 4 hours : add lubriCATEEEEing oil, lubriCATEEEEion shaft pin
and rotating gear 1 time.
Every half a year or 1000 hours (whichever comes first): replace
the hydraulic cylinder oil seal and motor oil seal once. If the oil
seal is not replaced within the specified period, there is a
certain probability that other parts of the product will be
damaged, for example, the cylinder will be strained.
Special notes on operation and use of demolition hydraulic shear:
Only reasonable and correct use of a good product can effectively
improve work efficiency, but also ensure the service life of the
product, so the following special notes must be read carefully
before use:
1. Demolition shear cylinder shear pressure 250-320kg, motor rotary
pressure 80-100kg, rotary flow per minute 25-35L, Excessive
pressure
flow will cause damage to the motor and support gear (rotation
speed shall not exceed 10r min)!!
2. Before the first use of the equipment must be filled with
butter, ensure that each butter nozzle filling thoroughly, use
again 1 times /4 hours. Before using the equipment, all the stop
valves of the four small arm iron pipes must be opened to prevent
one-way oil from damaging the motor.
3. Demolition shear can not rotate when cutting materials, easy to
cause damage to the motor and slewing support.
4. All blades shall not be cut quenched material, alloy steel,
recycled iron and rail, which can easily cause blade collapse. Bear
in mind: the phenomenon of collapse of knife and blade occurs
instantly in shear heat treatment.
5. It is forbidden to use demolition shear to hit steel and move,
push and pull heavy objects.
6. Pay attention to regular maintenance and daily inspection. If
oil pipe leakage and bolt looseness are found need to reinforce
timely .Retract the cylinder when placing for a long time.
Our Hydraulic Demolition Shears Product Parameter
| Item/Model | Unit | HL150JQ-2 | HL200JQ-2 | HL300JQ-2 | HL350JQ |
| Overall Length | mm | 2050 | 2350 | 2350 | 2590 |
| Maximum Opening | mm | 740 | 900 | 910 | 1100 |
| Blade length | mm | 160 | 180 | 180 | 180 |
| Rotating flow | L/min | 30-50 | 40-60 | 40-60 | 40-60 |
| Rotating pressure | kg/cm2 | 100-130 | 110-130 | 110-150 | 110-150 |
| Operate flow | L/min | 150-180 | 160-200 | 160-200 | 180-260 |
| Operate pressure | kg/cm2 | 220-250 | 280-320 | 280-320 | 280-350 |
| Weight | kg | 1310 | 2200 | 2300 | 2800 |
| Head shear force | ton | 55 | 72 | 72 | 90 |
| Middle shear force | ton | 85 | 116 | 116 | 152 |
| Root shear force | ton | 160 | 268 | 268 | 288 |
| Suitable Excavator | ton | 12-18 | 18-24 | 24-36 | 36-40 |
How long is the warranty period of the product?
| Part name | Warranty period | Warranty scope |
| Main part | 12 months | Steel plate cracking in 3 months, replacement of cracking parts.more than 3 months within 6 months of steel plate cracking company to provide maintenance, the company does not bear any other costs. (Damages caused by non-compliance with the operation specifiCATEEEEions are not within the scope of compensation for cracking caused by reinforcement without the consent of the company).6-12months, provide maintenance, the company does not bear any other costs. |
| pivoting support | 6months | Free replacement of new products within 3 months of rotation support fracture, free maintenance within 6 months. If lubriCATEEEEing oil is not added according to regulations, oil seal replacement time is exceeded, and regular maintenance is poor, the rolling body and rollaway nest are stuck and corroded, which are not within the scope of claim, and the tooth wear in the ring is not within the scope of warranty. |
| Oil cylinder | 6months | Oil seal leakage within 3 months, free of charge oil seal, cylinder and piston rod cracking and fracture free of charge replacement of new products, free maintenance within 12 months for any problems, only charge for the replacement of accessories. The freight of return to factory shall be borne by oneself. |
| Motor | 6months | Shell cracking company provides free maintenance within 12 months, return to the factory to bear the freight. Output shaft fracture is caused by excessive pressure or illegal operation, so it is not covered by warranty. Oil leakage of more than 3 months is not within the scope of claims must be purchased by their own oil seals. |
| pipeline | 3months | The manufacturer is not responsible for the damage caused by improper maintenance and excessive adjustment of the pressure of the overflow valve after external force collision. |
| The valve block | 3months | Foreign bodies in the hydraulic oil, over the oil seal replacement time, poor regular maintenance, user error, external impact, stuck and strain after a month, ,are not within the scope of claim. |
| blade | 1month | Blade edge, slag, scratches, replace new. Breakage, loss, and due to operation, not covered by warranty. |
| All kinds of bolts, shaft pins, joints, foot switches are not guaranteed, all broken parts are not covered by warranty. | ||
