Anengji(Chengdu) New Energy Co., Ltd. |
Verified Suppliers
|
|
Type 1 To Type 2 Adapter For EV Charging Adapter 32A Without Cables
The Adapter is made of high quality thermoplastic, which is resistent to scratches, pressure and shocks. Thanks to the use of non-combustible materials, all risks have been minimized. Thanks to its low weight and compactness, the adapter is an ideal travel companion.
The Type 1 to Type 2 adapter is a suitable for those who have replaced an older electric car with a new one and still want to use the charging cable they purchased for their previous vehicle. The adapter should also be a part of the standard equipment of any car with a type 2 connector if it goes on journeys where it may encounter a charging station with an integrated cable that has a type 1 connector.
How to use EV Adapter Type 1 to Type 2 32A:
We recommend the following steps:
1. Plug the Type 2 end of the adapter into the charging cable
2. Plug the Type 1 end of the adapter into the charging socket of the car
3. Once the Type 1 to Type 2 32A adapter snaps into place, you're ready to start charging*
* Don't forget to activate the charging station
After charging is complete, disconnect the vehicle side first, then the charging station side. Unplug the cable from the charging station when not in use.
How to store:
This product is the lifeline of your electric vehicle and it is
very important to protect it. Store it in a dry place, preferably
in a storage bag. Moisture in the contacts can render the cable
non-functional. If this happens, leave the product in a warm, dry
place for 24 hours. Avoid leaving the adapter where it may be
exposed to sunlight, wind, dust and rain. Dust and dirt can prevent
the cable from charging. For longer life, make sure your charging
adapter is not twisted or excessively bent during storage.
This product is very easy to use and store. The adapter is designed for outdoor and indoor charging and has IP44 (degree of protection). So that means it's protected against small objects and water splashes from any direction.
Safety Precautions:
Always inspect cables, adapters and contacts for damage and
contamination before use.
Never charge a damaged product.
Never use dirty or wet contacts.
Only connect the charging adapter to vehicle outlets and
infrastructure outlets that are water, moisture and water
resistant.
Never disconnect the plug by force. Hazardous arcing can cause
serious injury or death.
Some electric vehicles can be started by connecting cables. Just
make sure to disconnect it before driving away.
Never touch a connector if it is smoking or melting. Stop the
charging process if possible. In any case press the emergency stop
switch on the charging station.
Make sure the cables are kept out of the reach of children. Only
those with a valid motor vehicle driver's license can use it.
DATASHEET
Model | ES-IEC-EV32A |
Product Specifications | |
Products Features | Complying IEC62196-2 and SAE J1772 2010 standards |
Charging capacity | 32A |
Rated Voltage | 250VAC |
Withstand Voltage | 2000VAC |
GB/T Plug Pin Temperature Rise | <50K |
Insulation Resistance | >10MΩ(DC500V) |
Temperature Rise of the Discharge Socket | <45K |
Withstand Voltage | 2000V |
Fire-proof Class | UL94 V-0 |
Contact Resistance | ≤ 10mΩ |
Protection Level | IP55 (coupled) |
Product Shell | Thermoplastics |
Conductor | Copper alloy with silver plating |
Working Temperature | -30℃ +50℃ |
Warranty | 24 months |