Active Member
|
[China]
Address: 7D，Block A, Olympic Building, 8th Chang An North Road, Xi'an, Shaanxi,China
Contact name:Cherry
Xi'an Excellent Electromechnical Co.,Ltd |
|
Type ECW－ZP2+ Elevator Weighing Device and load sensor ECW-GD
System Introduction
Declaration:In any case, our part is only responsible for the product own quality within the warranty period.
Description:
1.State Indication - Flickering:About “Once per Second”;
2.Button Operation - Press:Press and release soon;Hold:Press constantly;
3.Relay - Keep the state of Picking-up in the period of system being unadjusted or fault;
l Main Features:
1. With the adoption of “DH: Character “-” type sensor,it can be easily installed at rope hitch；
2. The system is of the structure of sensor with the domination of loading cell and controller, which can be installed at the car-side rope hitch;
3. Directly outputting full-load or overload signal depending on the change of elevator car payload;
4. Simple adjustment, high precision of measurement and quick and easy installation.
l Technical Specifications:
⒈ | Application Range | Being applicable to all elevators with payload of 500㎏～20000㎏ for full-load and overload signal(Depending on loading sensor with the options of 1.5tons/3T/5T) |
⒉ | Sensitivity | For the elevator with rated load of 1 ton, it is 5Kg |
⒊ | System Error | ≤1.5％(5～40℃) |
⒋ | Output Mode | Switching Signal:Full-load and overload Dynamic Close and Dynamic Open contact |
⒌ | Operation Temperature | -25～55℃ |
⒍ | Power Source | DC 24V(±10%),Operating current for the whole set≤100mA |
M:Intensity exceeding the above listed parameter limits may cause the system abnormality or its permanent damage.
