Active Member
|
[China]
Address: 7D，Block A, Olympic Building, 8th Chang An North Road, Xi'an, Shaanxi,China
Contact name:Cherry
Xi'an Excellent Electromechnical Co.,Ltd |
|
Elevator magbetic switch
P/N:KCB-R-BN320 cable outlet in the left
Surface and direction of actuation marked by colored symbol
The opening and closeing of the switch is dependent on the directly of acturtion, the strength and polarity of the actuacting magnet
Mounting with two M4 bolts
Enclosure:fiberglass reinforced thermoplastic.Applied in elevator level transducer, limit switches and other industrial and civil use of non-contact switch
type | KCB-R-BN320 | ||||
Switching capacity | Max | 120W/VA | Switching time with out bounce | Max | 3.5ms |
Switching voltage | Max | 250V/AC | Bounce time | Max | 0.5ms |
Switching current | Max | 3A | Release time | Max | 0.2ms |
Dielectric strength | Min | 800 VDC | Resonant frequency | Typ | 900Hz |
Insulation resistance | Min | 10”Ohms | Switching frequency | Max | 300Hz |
Operating principle | Magnetic | Shock 11ms | Max | 50g | |
Carrying current | Max | 5A | Testing distance | mm | 0-25 |
Termination | 4.8mm Flat plug ;6.3mm Flat plug, cable wire | ||||
Switch Working Features
Surface and direction of actuation marked by colored symbol
The opening and closing of the swithc is dependent on the direction of actuation, the strength and polarity of the actuating magnet.
LED indicating the switching condition
Switching distances:Min. 0mm max.25mm
The NC and NO function depends on the direction of actuation and the polarity of the actuating magnet
The switches are to be mounted on iron with a non-magnetic layer of at least 20mm
Other products of our company elevator load weighting device:
